Re: [PATCH v5 03/11] dt-bindings: bus: document RIFSC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/2/23 20:30, Rob Herring wrote:
On Fri, Sep 29, 2023 at 04:28:44PM +0200, Gatien Chevallier wrote:
Document RIFSC (RIF security controller). RIFSC is a firewall controller
composed of different kinds of hardware resources.

Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
---

Changes in V5:
	- Renamed feature-domain* to access-control*

Changes in V2:
	- Corrected errors highlighted by Rob's robot
	- No longer define the maxItems for the "feature-domains"
	  property
	- Fix example (node name, status)
	- Declare "feature-domain-names" as an optional
	  property for child nodes
	- Fix description of "feature-domains" property

  .../bindings/bus/st,stm32mp25-rifsc.yaml      | 105 ++++++++++++++++++
  1 file changed, 105 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml

diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml
new file mode 100644
index 000000000000..c28fceff3036
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Resource isolation framework security controller
+
+maintainers:
+  - Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
+
+description: |
+  Resource isolation framework (RIF) is a comprehensive set of hardware blocks
+  designed to enforce and manage isolation of STM32 hardware resources like
+  memory and peripherals.
+
+  The RIFSC (RIF security controller) is composed of three sets of registers,
+  each managing a specific set of hardware resources:
+    - RISC registers associated with RISUP logic (resource isolation device unit
+      for peripherals), assign all non-RIF aware peripherals to zero, one or
+      any security domains (secure, privilege, compartment).
+    - RIMC registers: associated with RIMU logic (resource isolation master
+      unit), assign all non RIF-aware bus master to one security domain by
+      setting secure, privileged and compartment information on the system bus.
+      Alternatively, the RISUP logic controlling the device port access to a
+      peripheral can assign target bus attributes to this peripheral master port
+      (supported attribute: CID).
+    - RISC registers associated with RISAL logic (resource isolation device unit
+      for address space - Lite version), assign address space subregions to one
+      security domains (secure, privilege, compartment).
+
+properties:
+  compatible:
+    contains:
+      const: st,stm32mp25-rifsc
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  "#access-controller-cells":
+    const: 1

You should define what the cells contain here.


Ok, I'll do this as well for the ETZPC binding

+
+  access-control-provider: true
+

Will be dropped, ditto for ETZPC.

+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Peripherals
+    type: object

        additionalProperties: true

+    properties:
+      access-controller:
+        minItems: 1
+        description:
+          The phandle of the firewall controller of the peripheral and the
+          platform-specific firewall ID of the peripheral.
+
+      access-controller-names:
+        minItems: 1

Drop all this. You have to define these in the specific device schemas
anyways.


I guess that:

patternProperties:
  "^.*@[0-9a-f]+$":
    description: Peripherals
    type: object

    required:
      - access-controller

is sufficient if I describe what the content of the cells will be in the
"#access-controller-cells" above. It avoids redundant information. I'll
make the change for V6, thank you.

Best regards,
Gatien

+
+    required:
+      - access-controller
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - access-control-provider
+  - "#access-controller-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example, the usart2 device refers to rifsc as its domain
+    // controller.
+    // Access rights are verified before creating devices.
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rifsc: bus@42080000 {
+        compatible = "st,stm32mp25-rifsc";
+        reg = <0x42080000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        access-control-provider;
+        #access-controller-cells = <1>;
+        ranges;
+
+        usart2: serial@400e0000 {
+              compatible = "st,stm32h7-uart";
+              reg = <0x400e0000 0x400>;
+              interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+              clocks = <&ck_flexgen_08>;
+              access-controller = <&rifsc 32>;
+        };
+    };
--
2.25.1




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux