On Wed, Sep 27, 2023 at 10:06:16AM +0800, cy_huang@xxxxxxxxxxx wrote:
> Since rtq9128 can support 4 channel I2S mode audio data, there are two
> dedicated data input pins for CH12 and CH34. But in TDM mode, input
> source was already drived on one data pin for multiple data slots. In
> this case, only one input source is needed for TDM mode.
>
> This patch is to add the data source pin selection for CH12 and CH34.
> + SOC_ENUM("CH12 TDM Data Select", rtq9128_ch12_tdm_data_select_enum),
> + SOC_ENUM("CH34 TDM Data Select", rtq9128_ch34_tdm_data_select_enum),
Is this something that's going to be changing dynamically at runtime or
should this be a device property that's set either by firmware or when
we're doing the TDM setup? This sounds like something I'd expect to be
fixed by the board design.
Attachment:
signature.asc
Description: PGP signature
