[PATCH] ice1724 MIDI on PHASE 22 and PHASE 28 and a few minor fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Changelog:* added info about PHASE 28 (as far as I could collect, I don't have a card)* added info about TS22PCI and new revisions of PHASE 22* disable 192k on PHASE 22 as AK4524 I2S doesn't support it* enable midi for both PHASE 22 and PHASE 28* enable SPDIF reciever on PHASE 22
MIDI works for me, I have tried loopback and it plays good. Thanks forhelp Pavel and Takashi.
diff --git a/pci/ice1712/phase.c b/pci/ice1712/phase.cindex f5acdee..6e596e9 100644--- a/pci/ice1712/phase.c+++ b/pci/ice1712/phase.c@@ -24,7 +24,8 @@ /* PHASE 22 overview:  *   Audio controller: VIA Envy24HT-S (slightly trimmed down versionof Envy24HT)  *   Analog chip: AK4524 (partially via Philip's 74HCT125)- *   Digital receiver: CS8414-CS (not supported in this release)+ *   Digital receiver: CS8414-CS (supported in this release)+ *		PHASE 22 revision 2.0 and Terrasoniq/Musonik TS22PCI have CS8416(support status unknown, please test and report)  *  *   Envy connects to AK4524  *	- CS directly from GPIO 10@@ -33,6 +34,12 @@  *		CDTI may be completely blocked by 74HCT125's gate #1 controlled by GPIO 3  */
+/* PHASE 28 overview:+ *   Audio controller: VIA Envy24HT (full untrimmed version, 8 ins 8 outs)+ *   Analog chip: WM8770 (8 channel DAC, 2 channel ADC)+ *   Digital receiver: CS8414-CS (supported in this release)+ */+ #include <asm/io.h> #include <linux/delay.h> #include <linux/interrupt.h>@@ -161,9 +168,9 @@ static int __devinit phase22_add_controls(structsnd_ice1712 *ice) }
 static unsigned char phase22_eeprom[] __devinitdata = {-	[ICE_EEP2_SYSCONF]     = 0x00,	/* 1xADC, 1xDACs */+	[ICE_EEP2_SYSCONF]     = 0x28,	/* clock 512, mpu 401,spdif-in/1xADC, 1xDACs */ 	[ICE_EEP2_ACLINK]      = 0x80,	/* I2S */-	[ICE_EEP2_I2S]         = 0xf8,	/* vol, 96k, 24bit */+	[ICE_EEP2_I2S]         = 0xf0,	/* vol, 96k, 24bit */ 	[ICE_EEP2_SPDIF]       = 0xc3,	/* out-en, out-int, spdif-in */ 	[ICE_EEP2_GPIO_DIR]    = 0xff, 	[ICE_EEP2_GPIO_DIR1]   = 0xff,@@ -177,7 +184,7 @@ static unsigned char phase22_eeprom[] __devinitdata = { };
 static unsigned char phase28_eeprom[] __devinitdata = {-	[ICE_EEP2_SYSCONF]     = 0x0b,	/* clock 512, spdif-in/ADC, 4DACs */+	[ICE_EEP2_SYSCONF]     = 0x2b,	/* clock 512, mpu401, spdif-in/1xADC, 4xDACs */ 	[ICE_EEP2_ACLINK]      = 0x80,	/* I2S */ 	[ICE_EEP2_I2S]         = 0xfc,	/* vol, 96k, 24bit, 192k */ 	[ICE_EEP2_SPDIF]       = 0xc3,	/* out-en, out-int, spdif-in */

-- Vedran Miletić_______________________________________________Alsa-devel mailing listAlsa-devel@xxxxxxxxxxxxxxxxxxxx://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux