Hi, * Péter Ujfalusi <peter.ujfalusi@xxxxxxxxx> [230919 18:25]: > > > On 7/5/23 22:03, Andreas Kemnade wrote: > > Commit 349355ce3a05 ("ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp") > > dropped prcm_fck for omap4, The prcm_fck should be there in the dts for each mcbsp interconnect targe module as "fck" alias and get's enabled/disabled when the mcbsp driver calls runtime PM. So maybe the description should explain that things broke as the aliases for prcm_fck and pad_ck no longer get added. > it also dropped the pad_fck for that matter. OK so an alias is needed for that too. That's the MCPDM_CLKCTRL pad_clks_ck alias, right? Seems like the pad_clks_ck should be claimed by the mcpdm and mcbsp drivers if they are used? I guess it would be for some external device use case? > > so the clk_src might not be >available making the > > clk_get(src) fail. > > Wow, so OMAP4 audio is pretty broken if would ever need to select FCLK? > By default we don't on OMAP4, but this is astonishing. So sounds like we just got lucky because of -ENOSUCHUSERS? The mcbsp works for me, not sure how come I'm not seeing this issue, does it now only work for the default clock source? Do we have some other examples for devices using other type of clocking? > > In such cases, rely on the devicetree to assign > > the correct parent. > > You cannot rely on DT to dynamically select the FCLK parent for > different use cases. > The dai_set_dai_sysclk() cannot select between internal or external > source of the reference clock and DT cannot handle this. > If one sampling frequency is available with pad_fck while other is only > possible with internal clock then this is no longer possible. If the functional clock source needs to be changed, seems things should work. The parent interconnect target module driver does not care about the fck rate. Not sure if the clock usage count causes issues though with reparenting, if so, sounds like reparenting needs to be done in runtime PM suspended state to do the switch. > > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> > > --- > > sound/soc/ti/omap-mcbsp.c | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c > > index 21fa7b9787997..f9fe96b61852b 100644 > > --- a/sound/soc/ti/omap-mcbsp.c > > +++ b/sound/soc/ti/omap-mcbsp.c > > @@ -70,8 +70,8 @@ static int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) > > > > fck_src = clk_get(mcbsp->dev, src); > > if (IS_ERR(fck_src)) { > > - dev_err(mcbsp->dev, "CLKS: could not clk_get() %s\n", src); > > - return -EINVAL; > > + dev_info(mcbsp->dev, "CLKS: could not clk_get() %s\n", src); > > + return 0; > > I would rather have some clock alias for OMAP4/5 to provide the clocks > that we need for the fclk. > If we did not got the clock we needed to select we cannot say that all > is good, carry on. > Normally the machine driver does this and it thinks that we switched > clocks while we did not and the clocking is all wrong now. How about someting like below to deal with getting the fck in a bit more future proof way: fck_src = clk_get(mcbsp->dev, src); if (IS_ERR(fck_src)) { fck_src = clk_get(mcbsp->dev->parent, "fck): ... } Also sounds like we should also add the missing the aliases too like Peter pointed out if mcbsp driver needs to reparent. But just adding the alias will possibly cause trouble for anybody adding mcbsp support for some other SoC variant. To me it seems in the long run the mcbsp configurations using pad_fck should configure it in the dts for the interconnect target module node instead as the default clock. Then mcbsp can still look up the fck of the parent device, and change it dynamically as needed. Regards, Tony