Re: [PATCH v6 23/33] ASoC: dt-bindings: Add Q6USB backend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16.09.2023 02:10, Wesley Cheng wrote:
> Add a dt-binding to describe the definition of enabling the Q6 USB backend
> device for audio offloading.  The node carries information, which is passed
> along to the QC USB SND class driver counterpart.  These parameters will be
> utilized during QMI stream enable requests.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/sound/qcom,q6usb.yaml | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml
> new file mode 100644
> index 000000000000..51ff0b1ffa2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,q6usb-dais.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm ASoC DPCM USB backend DAI
> +
> +maintainers:
> +  - Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
> +
> +description:
> +  The USB port is a supported AFE path on the Q6 DSP.  This ASoC DPCM
> +  backend DAI will communicate the required settings to initialize the
> +  XHCI host controller properly for enabling the offloaded audio stream.
> +  Parameters defined under this node will carry settings, which will be
> +  passed along during the QMI stream enable request and configuration of
> +  the XHCI host controller.
> +
> +allOf:
> +  - $ref: dai-common.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,q6usb
> +
> +  iommus:
> +    maxItems: 1
> +
> +  "#sound-dai-cells":
> +    const: 1
> +
> +  qcom,usb-audio-intr-num:
> +    description:
> +      Desired XHCI interrupter number to use.  Depending on the audio DSP
> +      on the platform, it will operate on a specific XHCI interrupter.
So is this the number of interrupters to be used or the index of
a single interrupter? If the latter, then "num" is definitely way
too ambiguous.

Konrad



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux