From: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx> 20s seems unnecessarily large for the DSP init timeout. This coupled with multiple FW boot attempts causes an excessive delay in the error path when booting in recovery mode. Reduce it to 0.5s and use the existing HDA_DSP_INIT_TIMEOUT_US. Link: https://github.com/thesofproject/linux/issues/4565 Signed-off-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Reviewed-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx> --- sound/soc/sof/intel/mtl.c | 2 +- sound/soc/sof/intel/mtl.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/sof/intel/mtl.c b/sound/soc/sof/intel/mtl.c index b84ca58da9d5..f9412517eaf2 100644 --- a/sound/soc/sof/intel/mtl.c +++ b/sound/soc/sof/intel/mtl.c @@ -460,7 +460,7 @@ int mtl_dsp_cl_init(struct snd_sof_dev *sdev, int stream_tag, bool imr_boot) /* step 3: wait for IPC DONE bit from ROM */ ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, chip->ipc_ack, status, ((status & chip->ipc_ack_mask) == chip->ipc_ack_mask), - HDA_DSP_REG_POLL_INTERVAL_US, MTL_DSP_PURGE_TIMEOUT_US); + HDA_DSP_REG_POLL_INTERVAL_US, HDA_DSP_INIT_TIMEOUT_US); if (ret < 0) { if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS) dev_err(sdev->dev, "timeout waiting for purge IPC done\n"); diff --git a/sound/soc/sof/intel/mtl.h b/sound/soc/sof/intel/mtl.h index 02181490f12a..95696b3d7c4c 100644 --- a/sound/soc/sof/intel/mtl.h +++ b/sound/soc/sof/intel/mtl.h @@ -62,7 +62,6 @@ #define MTL_DSP_IRQSTS_IPC BIT(0) #define MTL_DSP_IRQSTS_SDW BIT(6) -#define MTL_DSP_PURGE_TIMEOUT_US 20000000 /* 20s */ #define MTL_DSP_REG_POLL_INTERVAL_US 10 /* 10 us */ /* Memory windows */ -- 2.42.0