The Clarett 8Pre USB works the same as the Clarett+ 8Pre, only the USB ID is different. Tested-by: Philippe Perrot <philippe@xxxxxxxxxxxxx> Signed-off-by: Geoffrey D. Bennett <g@xxxxx> --- sound/usb/mixer_quirks.c | 1 + sound/usb/mixer_scarlett_gen2.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index ab0d459f4271..9911859d2750 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -3420,6 +3420,7 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x1235, 0x8213): /* Focusrite Scarlett 8i6 3rd Gen */ case USB_ID(0x1235, 0x8214): /* Focusrite Scarlett 18i8 3rd Gen */ case USB_ID(0x1235, 0x8215): /* Focusrite Scarlett 18i20 3rd Gen */ + case USB_ID(0x1235, 0x8208): /* Focusrite Clarett 8Pre USB */ case USB_ID(0x1235, 0x820c): /* Focusrite Clarett+ 8Pre */ err = snd_scarlett_gen2_init(mixer); break; diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index e4f1bfc54533..9b668ea57cb6 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -1,13 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Focusrite Scarlett Gen 2/3 and Clarett+ Driver for ALSA + * Focusrite Scarlett Gen 2/3 and Clarett USB/Clarett+ Driver for ALSA * * Supported models: * - 6i6/18i8/18i20 Gen 2 * - Solo/2i2/4i4/8i6/18i8/18i20 Gen 3 + * - Clarett 8Pre USB * - Clarett+ 8Pre * - * Copyright (c) 2018-2022 by Geoffrey D. Bennett <g at b4.vu> + * Copyright (c) 2018-2023 by Geoffrey D. Bennett <g at b4.vu> * Copyright (c) 2020-2021 by Vladimir Sadovnikov <sadko4u@xxxxxxxxx> * Copyright (c) 2022 by Christian Colglazier <christian@xxxxxxxxxxxxxxxx> * @@ -56,6 +57,9 @@ * Support for Clarett+ 8Pre added in Aug 2022 by Christian * Colglazier. * + * Support for Clarett 8Pre USB added in Sep 2023 (thanks to Philippe + * Perrot for confirmation). + * * This ALSA mixer gives access to (model-dependent): * - input, output, mixer-matrix muxes * - mixer-matrix gain stages @@ -899,7 +903,8 @@ static const struct scarlett2_device_entry scarlett2_devices[] = { { USB_ID(0x1235, 0x8214), &s18i8_gen3_info }, { USB_ID(0x1235, 0x8215), &s18i20_gen3_info }, - /* Supported Clarett+ devices */ + /* Supported Clarett USB/Clarett+ devices */ + { USB_ID(0x1235, 0x8208), &clarett_8pre_info }, { USB_ID(0x1235, 0x820c), &clarett_8pre_info }, /* End of list */ -- 2.41.0