Early versions of this mixer driver did not work on all hardware, so out of caution the driver was disabled by default and had to be explicitly enabled with device_setup=1. Since commit 764fa6e686e0 ("ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci") no more problems of this nature have been reported. Therefore, enable the driver by default but provide a new device_setup option to disable the driver in case that is needed. - device_setup value of 0 now means "enable" rather than "disable". - device_setup value of 1 is now ignored. - device_setup value of 4 now means "disable". Signed-off-by: Geoffrey D. Bennett <g@xxxxx> --- sound/usb/mixer_scarlett_gen2.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index 9d11bb08667e..ecd148ba6908 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -141,12 +141,12 @@ #include "mixer_scarlett_gen2.h" -/* device_setup value to enable */ -#define SCARLETT2_ENABLE 0x01 - /* device_setup value to allow turning MSD mode back on */ #define SCARLETT2_MSD_ENABLE 0x02 +/* device_setup value to disable this mixer driver */ +#define SCARLETT2_DISABLE 0x04 + /* some gui mixers can't handle negative ctl values */ #define SCARLETT2_VOLUME_BIAS 127 @@ -4172,19 +4172,20 @@ int snd_scarlett_gen2_init(struct usb_mixer_interface *mixer) if (!mixer->protocol) return 0; - if (!(chip->setup & SCARLETT2_ENABLE)) { + if (chip->setup & SCARLETT2_DISABLE) { usb_audio_info(chip, - "Focusrite Scarlett Gen 2/3 Mixer Driver disabled; " - "use options snd_usb_audio vid=0x%04x pid=0x%04x " - "device_setup=1 to enable and report any issues " - "to g@xxxxx", + "Focusrite Scarlett Gen 2/3 Mixer Driver disabled " + "by modprobe options (snd_usb_audio " + "vid=0x%04x pid=0x%04x device_setup=%d)\n", USB_ID_VENDOR(chip->usb_id), - USB_ID_PRODUCT(chip->usb_id)); + USB_ID_PRODUCT(chip->usb_id), + SCARLETT2_DISABLE); return 0; } usb_audio_info(chip, - "Focusrite Scarlett Gen 2/3 Mixer Driver enabled pid=0x%04x", + "Focusrite Scarlett Gen 2/3 Mixer Driver enabled (pid=0x%04x); " + "report any issues to g@xxxxx", USB_ID_PRODUCT(chip->usb_id)); err = snd_scarlett_gen2_controls_create(mixer); -- 2.41.0