On 11/09/2023 04:40, Myunguk Kim wrote: > There is a SoC between dwc and DMA block (ie. PL330) > that does not have a burst signal and supports only single. > > So write not-support-burst property on dts, it support single DMA mode. > > Signed-off-by: Myunguk Kim <mwkim@xxxxxxxxxxxxx> > --- > .../bindings/sound/snps,designware-i2s.yaml | 3 +++ Bindings are always separate patch. Please run scripts/checkpatch.pl and fix reported warnings. Some warnings can be ignored, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. Please use subject prefixes matching the subsystem. You can get them for example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory your patch is touching. > include/sound/designware_i2s.h | 1 + > sound/soc/dwc/dwc-i2s.c | 12 ++++++++++-- > 3 files changed, 14 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml > index a48d040b0a4f..43a46ba2a70c 100644 > --- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml > +++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml > @@ -86,6 +86,9 @@ properties: > The phandle to System Register Controller syscon node and the I2S-rx(ADC) > enabled control offset and mask of SYS_SYSCONSAIF__SYSCFG register. > > + no-burst: > + description: Use single transaction only between DesignWare I2S and DMA IP. This was not tested. Missing vendor prefix, type. Anyway please provide some explanation why this cannot be deduced from the compatible. Best regards, Krzysztof
