From: Elinor Montmasson <elinor.montmasson@xxxxxxxxxxxxxxxxxxxx> Add documentation about new dts bindings following new support for compatible "fsl,imx-audio-dummy-codec". Some CPU DAI don't require a real audio codec. The new compatible "fsl,imx-audio-dummy-codec" makes the driver use the dummy codec driver provided by the ASoC utils. It also allows to use not pre-configured audio codecs which don't require specific control through a codec driver. The new dts properties give the possibility to set some parameters about the CPU DAI usually set through the codec configuration. Signed-off-by: Elinor Montmasson <elinor.montmasson@xxxxxxxxxxxxxxxxxxxx> Co-authored-by: Philip-Dylan Gleonec <philip-dylan.gleonec@xxxxxxxxxxxxxxxxxxxx> --- .../bindings/sound/fsl-asoc-card.txt | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index 4e8dbc5abfd1..2e081a62d29d 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -17,6 +17,9 @@ Note: The card is initially designed for those sound cards who use AC'97, I2S and PCM DAI formats. However, it'll be also possible to support those non AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long as the driver has been properly upgraded. + To use CPU DAIs that do not require a codec such as an S/PDIF controller, + or to use a DAI to output or capture raw I2S/TDM data, you can + use the compatible "fsl,imx-audio-dummy-codec". The compatible list for this generic sound card currently: @@ -48,6 +51,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-nau8822" + "fsl,imx-audio-dummy-codec" + Required properties: - compatible : Contains one of entries in the compatible list. @@ -56,6 +61,8 @@ Required properties: - audio-cpu : The phandle of an CPU DAI controller +Required, unless "fsl,imx-audio-dummy-codec" compatible is used: + - audio-codec : The phandle of an audio codec Optional properties: @@ -88,6 +95,19 @@ Optional properties: - bitclock-inversion : dai-link uses bit clock inversion, for details see simple-card.yaml. - mclk-id : main clock id, specific for each card configuration. +Optional, relevant only with the "fsl,imx-audio-dummy-codec" compatible: + + - cpu-slot-width : Indicates a specific TDM slot width in bits. + - cpu-slot-num : Indicates a specific number of TDM slots per frame. + + - cpu-sysclk-freq-rx : Frequency of the CPU DAI sys clock for Rx. + - cpu-sysclk-freq-tx : Frequency of the CPU DAI sys clock for Tx. + + - cpu-sysclk-dir-rx-out : Boolean property. Specifies sys clock direction + as 'out' on initialization for Rx. If not set, default direction is 'in'. + - cpu-sysclk-dir-tx-out : Boolean property. Specifies sys clock direction + as 'out' on initialization for Tx. If not set, default direction is 'in'. + Optional unless SSI is selected as a CPU DAI: - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) -- 2.25.1