Without setting the parent for SCLK_USB480M the clock will use xin24m as
it's default parent. While this is generally not an issue for the usb
blocks to work, but the clock driver will "think" it runs at 24 MHz.
That becomes an issue for RK312x since SCLK_USB480M can be a parent for
other HW blocks (users of mux_pll_src_5plls_p) but they never will choose
this clock as their parent, because it runs at OSC frequency.
This sets usb480m_phy as SCLK_USB480M's parent, which now runs and outputs
the expected frequency of 480 MHz and the other blocks can choose
SCLK_USB480M as their parent if needed.
Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
---
arch/arm/boot/dts/rockchip/rk312x.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/rk312x.dtsi b/arch/arm/boot/dts/rockchip/rk312x.dtsi
index b13957d55500..19bd6448d122 100644
--- a/arch/arm/boot/dts/rockchip/rk312x.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk312x.dtsi
@@ -293,6 +293,8 @@ usb_host_ehci: usb@101c0000 {
reg = <0x101c0000 0x20000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST2>;
+ assigned-clocks = <&cru SCLK_USB480M>;
+ assigned-clock-parents = <&usb2phy>;
phys = <&usb2phy_host>;
phy-names = "usb";
status = "disabled";
@@ -303,6 +305,8 @@ usb_host_ohci: usb@101e0000 {
reg = <0x101e0000 0x20000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST2>;
+ assigned-clocks = <&cru SCLK_USB480M>;
+ assigned-clock-parents = <&usb2phy>;
phys = <&usb2phy_host>;
phy-names = "usb";
status = "disabled";
--
2.42.0
