Re: [PATCH v3 11/28] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

On 8/28/2023 11:33 PM, Krzysztof Kozlowski wrote:
On 29/08/2023 04:05, Wesley Cheng wrote:
Hi Rob,

On 3/11/2023 5:40 AM, Rob Herring wrote:
On Wed, Mar 08, 2023 at 03:57:34PM -0800, Wesley Cheng wrote:
Add a new definition for specifying how many XHCI secondary interrupters
can be allocated.  XHCI in general can potentially support up to 1024
interrupters, which some uses may want to limit depending on how many
users utilize the interrupters.

Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
---
   .../devicetree/bindings/usb/snps,dwc3.yaml          | 13 +++++++++++++
   1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index be36956af53b..4e2417191f93 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -359,6 +359,19 @@ properties:
       items:
         enum: [1, 4, 8, 16, 32, 64, 128, 256]
+ snps,num-hc-interrupters:
+    description:
+      Defines the maximum number of XHCI host controller interrupters that can
+      be supported.  The XHCI host controller has support to allocate multiple
+      event rings, which can be assigned to different clients/users.  The DWC3
+      controller has a maximum of 8 interrupters.  If this is not defined then
+      the value will be defaulted to 1.  This parameter is used only when
+      operating in host mode.

Is this an XHCI or DWC3 feature? The former should be added to the XHCI
binding.


Sorry for the late response...message got routed to a folder I don't
frequently check...

That is quite unfortunate, to put our feedback somewhere deep and then
send new versions of patches thinking there is apparently no feedback.
Fix your email process, so our reviews are not ignored. If they are, we
obviously should ignore your patches.


Spent some time fixing filters around, so should be addressed now.


This is a XHCI feature, but the DWC3 design is built in a way that DWC3
host initializes the XHCI device and populates the properties associated
to XHCI dev.

You speak about driver now, not bindings. If driver has limitations,
change it. Not really problem of bindings.


Its the limitation of the HW. Depending on how the SNPS DWC3 controller was implemented the vendor it can support less than the value mentioned in the Synopsys databook.

Thanks
Wesley Cheng



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux