On 23. 08. 23 13:08, Takashi Iwai wrote:
On Wed, 23 Aug 2023 12:47:33 +0200,
Jaroslav Kysela wrote:
On 23. 08. 23 12:20, Amadeusz Sławiński wrote:
On 8/23/2023 12:00 PM, Jaroslav Kysela wrote:
On 23. 08. 23 11:53, Takashi Iwai wrote:
On Wed, 23 Aug 2023 11:10:38 +0200,
Jaroslav Kysela wrote:
On 23. 08. 23 10:11, Cezary Rojewski wrote:
On 2023-08-22 9:03 PM, Jaroslav Kysela wrote:
On 22. 08. 23 17:38, Takashi Iwai wrote:
On Tue, 22 Aug 2023 17:29:47 +0200,
Jaroslav Kysela wrote:
On 22. 08. 23 17:07, Takashi Iwai wrote:
On Tue, 22 Aug 2023 17:03:02 +0200,
Jaroslav Kysela wrote:
On 11. 08. 23 18:48, Cezary Rojewski wrote:
+#define SNDRV_PCM_SUBFMTBIT_MSBITS_32
_SNDRV_PCM_SUBFMTBIT(MSBITS_32)
What was reason to add 32/32 format ? Subformat STD + msbits == 32
should already handle the maximal resolution. Until we do not
have 64
bit formats, it seems like an useless extension.
My understanding is to distinguish the cases "we do fully support
32bit" and "we don't care". But, the end effect is same for both,
user-space would handle 32bit in both cases, so this difference
won't
help much, indeed.
I don't think that we have a "do not care" situation. The
applications
currently expects to use the maximal msbits for STD subformat. The
subformat should be used only to refine (downgrade) the
resolution on
the driver / hw side on demand. I would just add only necessary API
extensions and save one bit for now.
Well, the current behavior (with STD) is to choose whatever 32bit
format the driver supports, and the driver may set a different value
of hw_params.msbits at hw_params. The explicit MSBITS_32 would
enforce the hw_params.msbits to be 32, otherwise hw_refine would
fail. So I see a potential difference.
I see. But if our target is to create a complete query/set msbits API,
we should cover all cases also for other formats.
I vote to replace SUBFMTBIT_MSBITS_32 to SUBFMTBIT_MSBITS_MAX as the
second bit (right after STD). The format hw parameter already defines
the maximal width. We can add SUBFMTBIT_MSBITS_32 when it's really
required. Note that MAX should be handled for all cases (not only for
S32_LE or so).
In my opinion STD already states "max". The word is not explicit either
- max in the eyes of whom? The driver'? Then the driver may reply: max
allowed e.g.: 24/32. And that translates to: fallback to STD.
Max in the contents of the physical sample format (S32 = 32 bits, S24
= 24 bits, S8 = 8 bits etc). It would mean, if the driver supports S32
but only with 24-bit resolution, this bit should not be
set/allowed. We can also use word full or something other. If we like
to extend the API in this way (force the specific msbits with the
error handling), all formats should be covered. For STD - see
Takashi's reply.
I think MAX can be problematic when the device supports multiple
formats, say, 16bit and 32bit. Then it's not clear which MAX points
to: is 16bit max or 32bit max.
I don't take this point. The subformat depends on the format, thus if
one format support max, it should be set for queries.
Theoretically, this problem is in this API extension proposal too.
Imagine that driver/hw support S24 and S32 formats and 20-bit msbits for
one of them. How do you handle this? The subformat depends on format and
should be refined when the format is known (single choice).
I find the subformat extension OK, as this doesn't need much change in
API. OTOH, if we want to be more consistent way, we may extend
hw_params for a new interval, e.g. SNDRV_PCM_HW_PARAM_MSBITS, and let
the driver choosing it. This will need more hw_params rules and
become more complex, but it allows drivers really exotic setups (like
19bit PCM :) But my gut feeling is that the subformat extension
should suffice.
I'm not ok with 32 == 32. We should handle this case universally or
discard.
Jaroslav
The reason for MSBITS32 is that, when only MSBITS_20 and MSBITS_24 are
defined, when userspace (in this case aplay) asks for usable formats and
subformat it gets something like:
--------------------
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S16_LE S32_LE
SUBFORMAT: STD MSBITS_20 MSBITS_24
SAMPLE_BITS: [16 32]
FRAME_BITS: [32 64]
CHANNELS: 2
RATE: 48000
when MSBITS_32 is not defined it is not clear if HW supports 24 or 32
bits as maximum possible value of msbits. However when MSBITS_32 is
defined it is clear - in the above case maximum possible bps then is 24,
because MSBITS_32 is missing in output.
STD behaves as before and takes maximum possible value - in above case
it is 24.
This example is nice for S32_LE but not S16_LE. With the max/full bit,
we can already cover also S16_LE (so that the application can ask for
the maximal msbits which fits to the physical format for S16_LE). It
would be also a preparation for future, when we need to deal with more
msbits combos (like 14bit or 15bit samples stored in the bigger
physical words) etc.
So application can set those parameters for in your case:
S16_LE + STD (maximum bits handled by driver - 16 in this case)
S16_LE + MSBITS_MAX (maximum physical bits for the format - 16)
S32_LE + STD (maximum bits handled by driver - 24 in this case)
S32_LE + MSBITS_MAX (maximum physical bits for the format - 32)
S32_LE + MSBITS_24
S32_LE + MSBITS_20
Dtto for other format like S8, S24 etc. Another way is to define
MSBITS_8, MSBITS_16 etc. But I'd prefer to save subformat bits. The
MSBITS_MAX would cover almost all cases for now.
It becomes a bit tricky if we have a device that has 24bit bps on
32bit format and 16bit bps / 16bit format. Both formats and
subformats are bitmaps in hw_params, and initially formats bitmap is
16|24 and subformats bitmap is MAX|24.
Now, suppose that app determines to use 16bit. Then we need to we
need to update subformats bitmap to MAX by dropping 24. OTOH, if app
chooses 32bit format, subformats will be 24 by dropping MAX, as we
don't support 32 bps. And, it's not so trivial to achieve this
commonly only with the single subformats bitmap of snd_pcm_hardware,
as the meaning of MAX depends on the chosen format.
It's easy to implement using a code which will go through all set format bits
and do bitwise OR for all corresponding subformat bits. We can use a callback
which the driver may override.
Something like (for the above HDA example): - SUBFMTBIT_STD is required so it
would be handled at the upper level):
snd_pcm_subformat_t (*get_subformat)(struct snd_pcm_substream *substream,
snd_pcm_format_t format)
{
switch (format) {
case SNDRV_PCM_FMTBIT_S16_LE:
return SNDRV_PCM_SUBFMTBIT_MSBITS_MAX;
case SNDRV_PCM_FMTBIT_S32_LE:
return SNDRV_PCM_SUBFMTBIT_MSBITS_24 |
SNDRV_PCM_SUBFMTBIT_MSBITS_20;
default:
return 0;
}
}
SUBFMTBIT_STD is required so it would be handled at the upper level.
Meanwhile, if the subformats bitmap is with explicit bit flags,
i.e. 24|16, we can reduce the bitmap easily depending on the format.
I don't think that the current proposed code does any reduction. It will
return MSBITS_24 when only S16_LE format is selected, too. The refining
mechanism is ignored. We need to handle subformat bits differently than format
bits because the dependency.
Jaroslav
--
Jaroslav Kysela <perex@xxxxxxxx>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
