The ACPI setting for a GPIO default state has higher priority than the flag passed to devm_gpiod_get_optional() so ACPI can override the GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting. Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a reason to stop passing it to devm_gpiod_get_optional(). So we still pass it to state our intent, but can deal with it having no effect. Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx> --- sound/soc/codecs/cs35l56.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index be400208205a..9560059c867b 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -1069,6 +1069,8 @@ int cs35l56_common_probe(struct cs35l56_private *cs35l56) return dev_err_probe(cs35l56->base.dev, ret, "Failed to enable supplies\n"); if (cs35l56->base.reset_gpio) { + /* ACPI can override GPIOD_OUT_LOW flag so force it to start low */ + gpiod_set_value_cansleep(cs35l56->base.reset_gpio, 0); cs35l56_wait_min_reset_pulse(); gpiod_set_value_cansleep(cs35l56->base.reset_gpio, 1); } -- 2.30.2