This driver has correctly mapped jack kcontrols for Headphone and Headset Mic. However, it is also mapping Line Out jack detection events to the Headphone kcontrol. The WM5100 codec used here can distinguish Line Out connections from Headphone connections. Decouple the two, expose Line Out to userspace as an independent kcontrol and add the necessary widget. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@xxxxxxxxx> --- I'm not sure this is a good idea, but still... sound/soc/samsung/lowland.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/soc/samsung/lowland.c b/sound/soc/samsung/lowland.c index 106770be6fc5..a79df871ea13 100644 --- a/sound/soc/samsung/lowland.c +++ b/sound/soc/samsung/lowland.c @@ -22,12 +22,16 @@ static struct snd_soc_jack lowland_headset; static struct snd_soc_jack_pin lowland_headset_pins[] = { { .pin = "Headphone", - .mask = SND_JACK_HEADPHONE | SND_JACK_LINEOUT, + .mask = SND_JACK_HEADPHONE, }, { .pin = "Headset Mic", .mask = SND_JACK_MICROPHONE, }, + { + .pin = "Line Out", + .mask = SND_JACK_LINEOUT, + }, }; static int lowland_wm5100_init(struct snd_soc_pcm_runtime *rtd) @@ -140,11 +144,13 @@ static const struct snd_kcontrol_new controls[] = { SOC_DAPM_PIN_SWITCH("WM1250 Input"), SOC_DAPM_PIN_SWITCH("WM1250 Output"), SOC_DAPM_PIN_SWITCH("Headphone"), + SOC_DAPM_PIN_SWITCH("Line Out"), }; static const struct snd_soc_dapm_widget widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_LINE("Line Out", NULL), SND_SOC_DAPM_SPK("Main Speaker", NULL), -- 2.40.1