This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here supports detecting Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@xxxxxxxxx> --- sound/soc/rockchip/rockchip_rt5645.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/sound/soc/rockchip/rockchip_rt5645.c b/sound/soc/rockchip/rockchip_rt5645.c index e73a342b7953..ef9fdf0386cb 100644 --- a/sound/soc/rockchip/rockchip_rt5645.c +++ b/sound/soc/rockchip/rockchip_rt5645.c @@ -22,6 +22,16 @@ #define DRV_NAME "rockchip-snd-rt5645" static struct snd_soc_jack headset_jack; +static struct snd_soc_jack_pin headset_jack_pins[] = { + { + .pin = "Headphones", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; static const struct snd_soc_dapm_widget rk_dapm_widgets[] = { SND_SOC_DAPM_HP("Headphones", NULL), @@ -103,11 +113,13 @@ static int rk_init(struct snd_soc_pcm_runtime *runtime) int ret; /* Enable Headset and 4 Buttons Jack detection */ - ret = snd_soc_card_jack_new(card, "Headset Jack", - SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3, - &headset_jack); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", + SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3, + &headset_jack, + headset_jack_pins, + ARRAY_SIZE(headset_jack_pins)); if (ret) { dev_err(card->dev, "New Headset Jack failed! (%d)\n", ret); return ret; -- 2.40.1