This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5663 codec used here can detect Headphone and Headset Mic connections. Expose each to userspace as a kcontrol. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@xxxxxxxxx> --- sound/soc/qcom/sdm845.c | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index 02612af714a8..29d23fe5dfa2 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -42,6 +42,17 @@ struct sdm845_snd_data { struct sdw_stream_runtime *sruntime[AFE_PORT_MAX]; }; +static struct snd_soc_jack_pin sdm845_jack_pins[] = { + { + .pin = "Headphone Jack", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28}; static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream, @@ -242,12 +253,14 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd) if (!pdata->jack_setup) { - rval = snd_soc_card_jack_new(card, "Headset Jack", - SND_JACK_HEADSET | - SND_JACK_HEADPHONE | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3, - &pdata->jack); + rval = snd_soc_card_jack_new_pins(card, "Headset Jack", + SND_JACK_HEADSET | + SND_JACK_HEADPHONE | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3, + &pdata->jack, + sdm845_jack_pins, + ARRAY_SIZE(sdm845_jack_pins)); if (rval < 0) { dev_err(card->dev, "Unable to add Headphone Jack\n"); @@ -539,6 +552,11 @@ static const struct snd_soc_dapm_widget sdm845_snd_widgets[] = { SND_SOC_DAPM_MIC("Int Mic", NULL), }; +static const struct snd_kcontrol_new sdm845_snd_controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone Jack"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), +}; + static void sdm845_add_ops(struct snd_soc_card *card) { struct snd_soc_dai_link *link; @@ -572,6 +590,8 @@ static int sdm845_snd_platform_probe(struct platform_device *pdev) card->driver_name = DRIVER_NAME; card->dapm_widgets = sdm845_snd_widgets; card->num_dapm_widgets = ARRAY_SIZE(sdm845_snd_widgets); + card->controls = sdm845_snd_controls; + card->num_controls = ARRAY_SIZE(sdm845_snd_controls); card->dev = dev; card->owner = THIS_MODULE; dev_set_drvdata(dev, card); -- 2.40.1