Commit ecd77d494ec9 ("ASoC: Intel: bytcr_wm5102: Add jack detect support") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The WM5102 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@xxxxxxxxx> --- sound/soc/intel/boards/bytcr_wm5102.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_wm5102.c b/sound/soc/intel/boards/bytcr_wm5102.c index f2382d4cb76f..5c9e06ed1a53 100644 --- a/sound/soc/intel/boards/bytcr_wm5102.c +++ b/sound/soc/intel/boards/bytcr_wm5102.c @@ -131,6 +131,7 @@ static const struct snd_soc_dapm_widget byt_wm5102_widgets[] = { SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_MIC("Internal Mic", NULL), SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_LINE("Line Out", NULL), SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), @@ -144,6 +145,7 @@ static const struct snd_soc_dapm_route byt_wm5102_audio_map[] = { {"Headset Mic", NULL, "Platform Clock"}, {"Internal Mic", NULL, "Platform Clock"}, {"Speaker", NULL, "Platform Clock"}, + {"Line Out", NULL, "Platform Clock"}, {"Speaker", NULL, "SPKOUTLP"}, {"Speaker", NULL, "SPKOUTLN"}, @@ -177,6 +179,7 @@ static const struct snd_kcontrol_new byt_wm5102_controls[] = { SOC_DAPM_PIN_SWITCH("Headset Mic"), SOC_DAPM_PIN_SWITCH("Internal Mic"), SOC_DAPM_PIN_SWITCH("Speaker"), + SOC_DAPM_PIN_SWITCH("Line Out"), }; static struct snd_soc_jack_pin byt_wm5102_pins[] = { @@ -188,6 +191,10 @@ static struct snd_soc_jack_pin byt_wm5102_pins[] = { .pin = "Headset Mic", .mask = SND_JACK_MICROPHONE, }, + { + .pin = "Line Out", + .mask = SND_JACK_LINEOUT, + }, }; static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime) -- 2.40.1