On 29/07/2023 11:12, wangweidong.a@xxxxxxxxxx wrote:
> From: Weidong Wang <wangweidong.a@xxxxxxxxxx>
>
> Add i2c and amplifier registration for
> aw88261 and their associated operation functions.
>
> Signed-off-by: Weidong Wang <wangweidong.a@xxxxxxxxxx>
> ---
> sound/soc/codecs/aw88261/aw88261.c | 517 +++++++++++++++++++++++++++++
> sound/soc/codecs/aw88261/aw88261.h | 52 +++
> 2 files changed, 569 insertions(+)
> create mode 100644 sound/soc/codecs/aw88261/aw88261.c
> create mode 100644 sound/soc/codecs/aw88261/aw88261.h
>
> +
> +static int aw88261_request_firmware_file(struct aw88261 *aw88261)
> +{
> + const struct firmware *cont = NULL;
> + int ret;
> +
> + aw88261->aw_pa->aw88261_base->fw_status = AW88261_DEV_FW_FAILED;
> +
> + ret = request_firmware(&cont, AW88261_ACF_FILE, aw88261->aw_pa->dev);
> + if (ret < 0) {
> + dev_err_probe(aw88261->aw_pa->dev, ret, "load [%s] failed!", AW88261_ACF_FILE);
> + return ret;
That's not how you use dev_err_probe. Instead: return dev_err_probe
> + }
> +
> + dev_info(aw88261->aw_pa->dev, "loaded %s - size: %zu\n",
> + AW88261_ACF_FILE, cont ? cont->size : 0);
> +
> + aw88261->aw_cfg = devm_kzalloc(aw88261->aw_pa->dev, cont->size + sizeof(int), GFP_KERNEL);
> + if (!aw88261->aw_cfg) {
> + release_firmware(cont);
> + return -ENOMEM;
> + }
> + aw88261->aw_cfg->len = (int)cont->size;
> + memcpy(aw88261->aw_cfg->data, cont->data, cont->size);
> + release_firmware(cont);
> +
> + ret = aw88395_dev_load_acf_check(aw88261->aw_pa->aw88261_base, aw88261->aw_cfg);
> + if (ret < 0) {
> + dev_err_probe(aw88261->aw_pa->dev, ret, "load [%s] failed !", AW88261_ACF_FILE);
> + return ret;
return dev_err_probe
> + }
> +
> + mutex_lock(&aw88261->lock);
> + /* aw device init */
> + ret = aw88261_dev_init(aw88261->aw_pa, aw88261->aw_cfg);
> + if (ret < 0)
> + dev_err(aw88261->aw_pa->dev, "dev init failed");
> + mutex_unlock(&aw88261->lock);
> +
> + return ret;
> +}
> +
> +static int aw88261_codec_probe(struct snd_soc_component *component)
> +{
> + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
> + struct aw88261 *aw88261 = snd_soc_component_get_drvdata(component);
> + int ret;
> +
> + INIT_DELAYED_WORK(&aw88261->start_work, aw88261_startup_work);
> +
> + ret = aw88261_request_firmware_file(aw88261);
> + if (ret < 0) {
> + dev_err_probe(aw88261->aw_pa->dev, ret, "aw88261_request_firmware_file failed\n");
> + return ret;
return dev_err_probe
> + }
> +
> + /* add widgets */
> + ret = snd_soc_dapm_new_controls(dapm, aw88261_dapm_widgets,
> + ARRAY_SIZE(aw88261_dapm_widgets));
> + if (ret < 0)
> + return ret;
> +
> + /* add route */
> + ret = snd_soc_dapm_add_routes(dapm, aw88261_audio_map,
> + ARRAY_SIZE(aw88261_audio_map));
> + if (ret < 0)
> + return ret;
> +
> + ret = snd_soc_add_component_controls(component, aw88261_controls,
> + ARRAY_SIZE(aw88261_controls));
> +
> + return ret;
> +}
> +
> +static void aw88261_codec_remove(struct snd_soc_component *aw_codec)
> +{
> + struct aw88261 *aw88261 = snd_soc_component_get_drvdata(aw_codec);
> +
> + cancel_delayed_work_sync(&aw88261->start_work);
> +}
> +
> +static const struct snd_soc_component_driver soc_codec_dev_aw88261 = {
> + .probe = aw88261_codec_probe,
> + .remove = aw88261_codec_remove,
> +};
> +
> +static void aw88261_hw_reset(struct aw88261 *aw88261)
> +{
> + gpiod_set_value_cansleep(aw88261->reset_gpio, 0);
> + usleep_range(AW88261_1000_US, AW88261_1000_US + 10);
> + gpiod_set_value_cansleep(aw88261->reset_gpio, 1);
> + usleep_range(AW88261_1000_US, AW88261_1000_US + 10);
> +}
> +
> +static int aw88261_i2c_probe(struct i2c_client *i2c)
> +{
> + struct aw88261 *aw88261;
> + int ret;
> +
> + ret = i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C);
> + if (!ret) {
> + dev_err_probe(&i2c->dev, ret, "check_functionality failed");
> + return -ENXIO;
return dev_err_probe
> + }
> +
> + aw88261 = devm_kzalloc(&i2c->dev, sizeof(struct aw88261), GFP_KERNEL);
sizeof(*)
> + if (!aw88261)
> + return -ENOMEM;
> +
> + mutex_init(&aw88261->lock);
> +
> + i2c_set_clientdata(i2c, aw88261);
> +
> + aw88261->reset_gpio = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(aw88261->reset_gpio))
> + dev_info(&i2c->dev, "reset gpio not defined\n");
> + else
> + aw88261_hw_reset(aw88261);
> +
> + aw88261->regmap = devm_regmap_init_i2c(i2c, &aw88261_remap_config);
> + if (IS_ERR(aw88261->regmap)) {
> + ret = PTR_ERR(aw88261->regmap);
> + dev_err_probe(&i2c->dev, ret, "failed to init regmap: %d\n", ret);
> + return ret;
return dev_err_probe
I asked you about this in your first version. I explicitly wrote "return
dev_err_probe", not some other syntax.
Best regards,
Krzysztof
