Re: [PATCH v2 07/11] bus: rifsc: introduce RIFSC firewall controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/26/23 12:26, Simon Horman wrote:
On Tue, Jul 25, 2023 at 06:41:00PM +0200, Gatien Chevallier wrote:

...

diff --git a/drivers/bus/stm32_rifsc.c b/drivers/bus/stm32_rifsc.c

...

+static int stm32_rif_acquire_semaphore(struct stm32_firewall_controller *stm32_firewall_controller,
+				       int id)
+{
+	void __iomem *addr = stm32_firewall_controller->mmio + RIFSC_RISC_PER0_SEMCR + 0x8 * id;
+
+	__set_bit(SEMCR_MUTEX, addr);

Hi Gatien,

Sparse seem a bit unhappy about this.

  .../stm32_rifsc.c:83:9: warning: cast removes address space '__iomem' of expression
  .../stm32_rifsc.c:83:9: warning: incorrect type in argument 2 (different address spaces)
  .../stm32_rifsc.c:83:9:    expected unsigned long volatile *addr
  .../stm32_rifsc.c:83:9:    got void [noderef] __iomem *addr
  .../stm32_rifsc.c:83:9: warning: incorrect type in argument 2 (different address spaces)
  .../stm32_rifsc.c:83:9:    expected unsigned long volatile *addr
  .../stm32_rifsc.c:83:9:    got void [noderef] __iomem *addr

But it's not immediately apparent to me what a good solution is.


Hi Simon,

This is indeed incorrect, set_bit is used to modify bit fields, not
writing to a register. I'll change to writel, as in
stm32_rif_release_semaphore(). Thank you for pointing this out.

Best regards,
Gatien
+
+	/* Check that CID1 has the semaphore */
+	if (stm32_rifsc_is_semaphore_available(addr) ||
+	    FIELD_GET(RIFSC_RISC_SCID_MASK, readl(addr)) != RIF_CID1)
+		return -EACCES;
+
+	return 0;
+}

...



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux