Now that we can use -EPROBE_DEFER, it's no longer required to spin off
the snd_hdac_i915_init into a workqueue.
Use the -EPROBE_DEFER mechanism instead, which must be returned in the
probe function.
Changes since v1:
- Use dev_err_probe()
- Don't move probed_devs bitmap unnecessarily. (tiwai)
- Use goto out_azx_free after cleanup of error path. (tiwai)
- Move snd_hdac_i915_init slightly upward, to ensure
it's always initialised before vga-switcheroo is called.
Signed-off-by: Maarten Lankhorst<maarten.lankhorst@xxxxxxxxxxxxxxx>
---
sound/pci/hda/hda_intel.c | 60 ++++++++++++++++++++-------------------
1 file changed, 31 insertions(+), 29 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 196ca76ac43ad..59039a1f01035 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2147,6 +2147,36 @@ static int azx_probe(struct pci_dev *pci,
pci_set_drvdata(pci, card);
+#ifdef CONFIG_SND_HDA_I915
+ /* bind with i915 if needed */
+ if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT) {
+ err = snd_hdac_i915_init(azx_bus(chip), false);
+ if (err < 0) {
+ /* if the controller is bound only with HDMI/DP
+ * (for HSW and BDW), we need to abort the probe;
+ * for other chips, still continue probing as other
+ * codecs can be on the same link.
+ */
+ if (CONTROLLER_IN_GPU(pci)) {
+ dev_err_probe(card->dev, err,
+ "HSW/BDW HD-audio HDMI/DP requires binding with gfx driver\n");
+
+ goto out_azx_free;
+ } else {
+ /* don't bother any longer */
+ chip->driver_caps &= ~AZX_DCAPS_I915_COMPONENT;
+ }
+ }
+
+ /* HSW/BDW controllers need this power */
+ if (CONTROLLER_IN_GPU(pci))
+ hda->need_i915_power = true;
+ }
+#else
+ if (CONTROLLER_IN_GPU(pci))
+ dev_err(card->dev, "Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915\n");
+#endif
+
err = register_vga_switcheroo(chip);
if (err < 0) {
dev_err(card->dev, "Error registering vga_switcheroo client\n");
@@ -2174,11 +2205,6 @@ static int azx_probe(struct pci_dev *pci,
}
#endif /* CONFIG_SND_HDA_PATCH_LOADER */
-#ifndef CONFIG_SND_HDA_I915
- if (CONTROLLER_IN_GPU(pci))
- dev_err(card->dev, "Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915\n");
-#endif
-
if (schedule_probe)
schedule_delayed_work(&hda->probe_work, 0);
@@ -2277,30 +2303,6 @@ static int azx_probe_continue(struct azx *chip)
to_hda_bus(bus)->bus_probing = 1;
hda->probe_continued = 1;
- /* bind with i915 if needed */
- if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT) {
- err = snd_hdac_i915_init(bus, true);
- if (err < 0) {
- /* if the controller is bound only with HDMI/DP
- * (for HSW and BDW), we need to abort the probe;
- * for other chips, still continue probing as other
- * codecs can be on the same link.
- */
- if (CONTROLLER_IN_GPU(pci)) {
- dev_err(chip->card->dev,
- "HSW/BDW HD-audio HDMI/DP requires binding with gfx driver\n");
- goto out_free;
- } else {
- /* don't bother any longer */
- chip->driver_caps &= ~AZX_DCAPS_I915_COMPONENT;
- }
- }
-
- /* HSW/BDW controllers need this power */
- if (CONTROLLER_IN_GPU(pci))
- hda->need_i915_power = true;
- }
-
/* Request display power well for the HDA controller or codec. For
* Haswell/Broadwell, both the display HDA controller and codec need
* this power. For other platforms, like Baytrail/Braswell, only the
--
2.39.2