The old register naming method is confusing. The reg 0x57 decides
the default headset hardware connection type, and the reg 0xfb is
the headset detection status register, which changes during headset
insertion. Change the name to ES8326_HPDET_TYPE and ES8326_HPDET_STA.
Signed-off-by: Zhu Ning <zhuning0077@xxxxxxxxx>
---
sound/soc/codecs/es8326.c | 10 +++++-----
sound/soc/codecs/es8326.h | 13 ++++++++-----
2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c
index 4399ba36aee2..e953c0157ba0 100644
--- a/sound/soc/codecs/es8326.c
+++ b/sound/soc/codecs/es8326.c
@@ -159,7 +159,7 @@ static const struct snd_soc_dapm_route es8326_dapm_routes[] = {
};
static const struct regmap_range es8326_volatile_ranges[] = {
- regmap_reg_range(ES8326_HP_DETECT, ES8326_HP_DETECT),
+ regmap_reg_range(ES8326_HPDET_STA, ES8326_HPDET_STA),
};
static const struct regmap_access_table es8326_volatile_table = {
@@ -519,7 +519,7 @@ static void es8326_jack_button_handler(struct work_struct *work)
return;
mutex_lock(&es8326->lock);
- iface = snd_soc_component_read(comp, ES8326_HP_DETECT);
+ iface = snd_soc_component_read(comp, ES8326_HPDET_STA);
switch (iface) {
case 0x93:
/* pause button detected */
@@ -578,7 +578,7 @@ static void es8326_jack_detect_handler(struct work_struct *work)
unsigned int iface;
mutex_lock(&es8326->lock);
- iface = snd_soc_component_read(comp, ES8326_HP_DETECT);
+ iface = snd_soc_component_read(comp, ES8326_HPDET_STA);
dev_dbg(comp->dev, "gpio flag %#04x", iface);
if ((iface & ES8326_HPINSERT_FLAG) == 0) {
/* Jack unplugged or spurious IRQ */
@@ -651,7 +651,7 @@ static int es8326_resume(struct snd_soc_component *component)
regmap_write(es8326->regmap, ES8326_ADC1_SRC, es8326->mic1_src);
regmap_write(es8326->regmap, ES8326_ADC2_SRC, es8326->mic2_src);
regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88);
- regmap_write(es8326->regmap, ES8326_HP_DET,
+ regmap_write(es8326->regmap, ES8326_HPDET_TYPE,
ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol);
regmap_write(es8326->regmap, ES8326_INT_SOURCE, es8326->interrupt_src);
regmap_write(es8326->regmap, ES8326_INTOUT_IO, es8326->interrupt_clk);
@@ -743,7 +743,7 @@ static void es8326_enable_jack_detect(struct snd_soc_component *component,
mutex_lock(&es8326->lock);
if (es8326->jd_inverted)
- snd_soc_component_update_bits(component, ES8326_HP_DET,
+ snd_soc_component_update_bits(component, ES8326_HPDET_TYPE,
ES8326_HP_DET_JACK_POL, ~es8326->jack_pol);
es8326->jack = jack;
diff --git a/sound/soc/codecs/es8326.h b/sound/soc/codecs/es8326.h
index 3f8f7da58062..cd04d11a88d9 100644
--- a/sound/soc/codecs/es8326.h
+++ b/sound/soc/codecs/es8326.h
@@ -73,15 +73,19 @@
#define ES8326_DRC_RECOVERY 0x53
#define ES8326_DRC_WINSIZE 0x54
#define ES8326_HPJACK_TIMER 0x56
-#define ES8326_HP_DET 0x57
+#define ES8326_HPDET_TYPE 0x57
#define ES8326_INT_SOURCE 0x58
#define ES8326_INTOUT_IO 0x59
#define ES8326_SDINOUT1_IO 0x5A
#define ES8326_SDINOUT23_IO 0x5B
#define ES8326_JACK_PULSE 0x5C
+#define ES8326_HP_MISC 0xF7
+#define ES8326_CTIA_OMTP_STA 0xF8
#define ES8326_PULLUP_CTL 0xF9
-#define ES8326_HP_DETECT 0xFB
+#define ES8326_CSM_I2C_STA 0xFA
+#define ES8326_HPDET_STA 0xFB
+#define ES8326_CSM_MUTE_STA 0xFC
#define ES8326_CHIP_ID1 0xFD
#define ES8326_CHIP_ID2 0xFE
#define ES8326_CHIP_VERSION 0xFF
@@ -146,7 +150,7 @@
#define ES8326_ADC3_SHIFT 0
#define ES8326_ADC4_SHIFT 3
-/* ES8326_HP_DET */
+/* ES8326_HPDET_TYPE */
#define ES8326_HP_DET_SRC_PIN27 (1 << 5)
#define ES8326_HP_DET_SRC_PIN9 (1 << 4)
#define ES8326_HP_DET_JACK_POL (1 << 3)
@@ -174,7 +178,7 @@
#define ES8326_SDINOUT2_SHIFT 4
#define ES8326_SDINOUT3_SHIFT 0
-/* ES8326_HP_DETECT */
+/* ES8326_HPDET_STA */
#define ES8326_HPINSERT_FLAG (1 << 1)
#define ES8326_HPBUTTON_FLAG (1 << 0)
@@ -182,4 +186,3 @@
#define ES8326_VERSION_B (1 << 0)
#endif
-
--
2.34.1
