[PATCH v3] ALSA: emu10k1: set the "no filtering" bits on PCM voices on Audigy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Given that the filter is already set to neutral for PCM voices, the
only observable effect is that the Z1/Z2/FXBUS registers don't have a
stray bit set for negative numbers anymore. The bit is below the ones
significant for output, but it would mess with 32-bit sample
recombination, which we intend to add.

kX-project does that, but I had to figure out myself why.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@xxxxxx>

---
v3:
- simplify, as this is actually unrelated to the interpolator
---
 include/sound/emu10k1.h | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
index 43c097952c3c..ef948e45b4c6 100644
--- a/include/sound/emu10k1.h
+++ b/include/sound/emu10k1.h
@@ -902,6 +902,11 @@ SUB_REG_NC(A_EHC, A_I2S_CAPTURE_RATE, 0x00000e00)  /* This sets the capture PCM
 #define A_TTDA			0x7a		/* Tank Table DMA Address			*/
 #define A_TTDD			0x7b		/* Tank Table DMA Data				*/
 
+// In A_FXRT1 & A_FXRT2, the 0x80 bit of each byte completely disables the
+// filter (CVCF_CURRENTFILTER) for the corresponding channel. There is no
+// effect on the volume (CVCF_CURRENTVOLUME) or the interpolator's filter
+// (CCCA_INTERPROM_MASK).
+
 #define A_FXRT2			0x7c
 #define A_FXRT_CHANNELE		0x0000003f	/* Effects send bus number for channel's effects send E	*/
 #define A_FXRT_CHANNELF		0x00003f00	/* Effects send bus number for channel's effects send F	*/
@@ -914,8 +919,6 @@ SUB_REG_NC(A_EHC, A_I2S_CAPTURE_RATE, 0x00000e00)  /* This sets the capture PCM
 #define A_FXSENDAMOUNT_G_MASK	0x0000FF00
 #define A_FXSENDAMOUNT_H_MASK	0x000000FF
 
-/* 0x7c, 0x7e "high bit is used for filtering" */
- 
 /* The send amounts for this one are the same as used with the emu10k1 */
 #define A_FXRT1			0x7e
 #define A_FXRT_CHANNELA		0x0000003f
@@ -1523,10 +1526,10 @@ struct snd_emu10k1_pcm_mixer {
 ((route[0] | (route[1] << 4) | (route[2] << 8) | (route[3] << 12)) << 16)
 
 #define snd_emu10k1_compose_audigy_fxrt1(route) \
-((unsigned int)route[0] | ((unsigned int)route[1] << 8) | ((unsigned int)route[2] << 16) | ((unsigned int)route[3] << 24))
+((unsigned int)route[0] | ((unsigned int)route[1] << 8) | ((unsigned int)route[2] << 16) | ((unsigned int)route[3] << 24) | 0x80808080)
 
 #define snd_emu10k1_compose_audigy_fxrt2(route) \
-((unsigned int)route[4] | ((unsigned int)route[5] << 8) | ((unsigned int)route[6] << 16) | ((unsigned int)route[7] << 24))
+((unsigned int)route[4] | ((unsigned int)route[5] << 8) | ((unsigned int)route[6] << 16) | ((unsigned int)route[7] << 24) | 0x80808080)
 
 #define snd_emu10k1_compose_audigy_sendamounts(vol) \
 (((unsigned int)vol[4] << 24) | ((unsigned int)vol[5] << 16) | ((unsigned int)vol[6] << 8) | (unsigned int)vol[7])
-- 
2.40.0.152.g15d061e6df




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux