Old power-up sequence causes large pop noise during start-up.
Using a new sequence instead.
Signed-off-by: Zhu Ning <zhuning0077@xxxxxxxxx>
---
sound/soc/codecs/es8326.c | 102 ++++++++++++++++++++++++++------------
sound/soc/codecs/es8326.h | 11 ++--
2 files changed, 79 insertions(+), 34 deletions(-)
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c
index 9190a8779334..d801c8e285e2 100644
--- a/sound/soc/codecs/es8326.c
+++ b/sound/soc/codecs/es8326.c
@@ -159,7 +159,7 @@ static const struct snd_soc_dapm_route es8326_dapm_routes[] = {
};
static const struct regmap_range es8326_volatile_ranges[] = {
- regmap_reg_range(ES8326_HP_DETECT, ES8326_HP_DETECT),
+ regmap_reg_range(ES8326_HPDET_TYPE, ES8326_HPDET_TYPE),
};
static const struct regmap_access_table es8326_volatile_table = {
@@ -519,7 +519,7 @@ static void es8326_jack_button_handler(struct work_struct *work)
return;
mutex_lock(&es8326->lock);
- iface = snd_soc_component_read(comp, ES8326_HP_DETECT);
+ iface = snd_soc_component_read(comp, ES8326_HPDET_TYPE);
switch (iface) {
case 0x93:
/* pause button detected */
@@ -578,7 +578,7 @@ static void es8326_jack_detect_handler(struct work_struct *work)
unsigned int iface;
mutex_lock(&es8326->lock);
- iface = snd_soc_component_read(comp, ES8326_HP_DETECT);
+ iface = snd_soc_component_read(comp, ES8326_HPDET_TYPE);
dev_dbg(comp->dev, "gpio flag %#04x", iface);
if ((iface & ES8326_HPINSERT_FLAG) == 0) {
/* Jack unplugged or spurious IRQ */
@@ -633,40 +633,80 @@ static irqreturn_t es8326_irq(int irq, void *dev_id)
static int es8326_resume(struct snd_soc_component *component)
{
struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component);
- unsigned int reg;
regcache_cache_only(es8326->regmap, false);
regcache_sync(es8326->regmap);
+ /* reset register value to default */
+ regmap_write(es8326->regmap, ES8326_CSM_I2C_STA, 0x01);
+ usleep_range(1000, 3000);
+ regmap_write(es8326->regmap, ES8326_CSM_I2C_STA, 0x00);
+ /* reset internal state */
+ regmap_write(es8326->regmap, ES8326_RESET, 0x1f);
+ regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x0E);
+ usleep_range(10000, 15000);
+ regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88);
+ /* set headphone default type and detect pin */
+ regmap_write(es8326->regmap, ES8326_HPDET_TYPE, 0x81);
+ regmap_write(es8326->regmap, ES8326_CLK_RESAMPLE, 0x05);
+
+ /* set internal oscillator as clock source of headpone cp */
+ regmap_write(es8326->regmap, ES8326_CLK_DIV_CPC, 0x84);
regmap_write(es8326->regmap, ES8326_CLK_CTL, ES8326_CLK_ON);
- /* Two channel ADC */
- regmap_write(es8326->regmap, ES8326_PULLUP_CTL, 0x02);
+ /* clock manager reset release */
+ regmap_write(es8326->regmap, ES8326_RESET, 0x17);
+ /* set headphone detection as half scan mode */
+ regmap_write(es8326->regmap, ES8326_HP_MISC, 0x08);
+ regmap_write(es8326->regmap, ES8326_PULLUP_CTL, 0x00);
+
+ /* enable headphone driver */
+ regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa7);
+ usleep_range(2000, 5000);
+ regmap_write(es8326->regmap, ES8326_HP_DRIVER_REF, 0xab);
+ usleep_range(2000, 5000);
+ regmap_write(es8326->regmap, ES8326_HP_DRIVER_REF, 0xbb);
+ usleep_range(2000, 5000);
+ regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa1);
+
regmap_write(es8326->regmap, ES8326_CLK_INV, 0x00);
- regmap_write(es8326->regmap, ES8326_CLK_DIV_CPC, 0x1F);
- regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xC8);
- regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x88);
- regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x20);
+ regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xc4);
+ regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x81);
+ regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x00);
+
+ /* turn off headphone out */
+ regmap_write(es8326->regmap, ES8326_HP_CAL, 0x00);
+ /* set ADC and DAC in low power mode */
+ regmap_write(es8326->regmap, ES8326_ANA_LP, 0xf0);
+
+ /* force micbias on */
+ regmap_write(es8326->regmap, ES8326_ANA_MICBIAS, 0x4f);
regmap_write(es8326->regmap, ES8326_SYS_BIAS, 0x08);
- regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0x22);
- regmap_write(es8326->regmap, ES8326_ADC1_SRC, es8326->mic1_src);
- regmap_write(es8326->regmap, ES8326_ADC2_SRC, es8326->mic2_src);
- regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88);
- regmap_write(es8326->regmap, ES8326_HP_DET,
- ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol);
- regmap_write(es8326->regmap, ES8326_INT_SOURCE, es8326->interrupt_src);
- regmap_write(es8326->regmap, ES8326_INTOUT_IO, es8326->interrupt_clk);
+ regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7F);
+ /* select vdda as micbias source */
+ regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x23);
+ /* set dac dsmclip = 1 */
+ regmap_write(es8326->regmap, ES8326_DAC_DSM, 0x08);
+ regmap_write(es8326->regmap, ES8326_DAC_VPPSCALE, 0x15);
+
+ regmap_write(es8326->regmap, ES8326_INT_SOURCE, 0x0c);
+ regmap_write(es8326->regmap, ES8326_INTOUT_IO,
+ es8326->interrupt_clk);
+ regmap_write(es8326->regmap, ES8326_SDINOUT1_IO,
+ (ES8326_IO_DMIC_CLK << ES8326_SDINOUT1_SHIFT));
+ regmap_write(es8326->regmap, ES8326_SDINOUT23_IO, ES8326_IO_INPUT);
+
+ regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x3b);
regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_ON);
- snd_soc_component_update_bits(component, ES8326_PGAGAIN,
- ES8326_MIC_SEL_MASK, ES8326_MIC1_SEL);
-
- regmap_read(es8326->regmap, ES8326_CHIP_VERSION, ®);
- if ((reg & ES8326_VERSION_B) == 1) {
- regmap_write(es8326->regmap, ES8326_ANA_MICBIAS, 0xDD);
- regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7F);
- regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x0F);
- /* enable button detect */
- regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xA0);
- }
+ regmap_update_bits(es8326->regmap, ES8326_PGAGAIN, ES8326_MIC_SEL_MASK,
+ ES8326_MIC1_SEL);
+
+ regmap_update_bits(es8326->regmap, ES8326_DAC_MUTE, ES8326_MUTE_MASK,
+ ES8326_MUTE);
+
+ regmap_write(es8326->regmap, ES8326_HPDET_TYPE, 0x80 |
+ ((es8326->version == ES8326_VERSION_B) ?
+ (ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol) :
+ (ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol | 0x04)));
es8326_irq(es8326->irq, es8326);
return 0;
@@ -712,7 +752,7 @@ static int es8326_probe(struct snd_soc_component *component)
ret = device_property_read_u8(component->dev, "everest,jack-pol", &es8326->jack_pol);
if (ret != 0) {
dev_dbg(component->dev, "jack-pol return %d", ret);
- es8326->jack_pol = ES8326_HP_DET_BUTTON_POL | ES8326_HP_TYPE_OMTP;
+ es8326->jack_pol = ES8326_HP_TYPE_AUTO;
}
dev_dbg(component->dev, "jack-pol %x", es8326->jack_pol);
@@ -743,7 +783,7 @@ static void es8326_enable_jack_detect(struct snd_soc_component *component,
mutex_lock(&es8326->lock);
if (es8326->jd_inverted)
- snd_soc_component_update_bits(component, ES8326_HP_DET,
+ snd_soc_component_update_bits(component, ES8326_HPDET_TYPE,
ES8326_HP_DET_JACK_POL, ~es8326->jack_pol);
es8326->jack = jack;
diff --git a/sound/soc/codecs/es8326.h b/sound/soc/codecs/es8326.h
index b837ed8c4b39..9093222ae04d 100644
--- a/sound/soc/codecs/es8326.h
+++ b/sound/soc/codecs/es8326.h
@@ -73,15 +73,19 @@
#define ES8326_DRC_RECOVERY 0x53
#define ES8326_DRC_WINSIZE 0x54
#define ES8326_HPJACK_TIMER 0x56
-#define ES8326_HP_DET 0x57
+#define ES8326_HPDET_TYPE 0x57
#define ES8326_INT_SOURCE 0x58
#define ES8326_INTOUT_IO 0x59
#define ES8326_SDINOUT1_IO 0x5A
#define ES8326_SDINOUT23_IO 0x5B
#define ES8326_JACK_PULSE 0x5C
+#define ES8326_HP_MISC 0xF7
+#define ES8326_CTIA_OMTP_STA 0xF8
#define ES8326_PULLUP_CTL 0xF9
-#define ES8326_HP_DETECT 0xFB
+#define ES8326_CSM_I2C_STA 0xFA
+#define ES8326_HPDET_STA 0xFB
+#define ES8326_CSM_MUTE_STA 0xFC
#define ES8326_CHIP_ID1 0xFD
#define ES8326_CHIP_ID2 0xFE
#define ES8326_CHIP_VERSION 0xFF
@@ -177,7 +181,8 @@
#define ES8326_HPBUTTON_FLAG (1 << 0)
/* ES8326_CHIP_VERSION 0xFF */
-#define ES8326_VERSION_B (1 << 0)
+#define ES8326_VERSION (1 << 0)
+#define ES8326_VERSION_B (3 << 0)
#endif
--
2.34.1
