On 6/27/2023 2:31 PM, Krzysztof Kozlowski wrote: CAUTION - External Email: Do not click links or open attachments unless you acknowledge the sender and content. On 26/06/2023 12:46, Seven Lee wrote: Convert the NAU8821 audio CODEC bindings to DT schema. Signed-off-by: Seven Lee <wtli@xxxxxxxxxxx><mailto:wtli@xxxxxxxxxxx> --- Thank you for your patch. There is something to discuss/improve. Thank you for your suggestion. + + nuvoton,jkdet-pull-up: + description: Pull-up JKDET pin. If set then JKDET pin is pull up, + otherwise pull down. + type: boolean + + nuvoton,jkdet-polarity: + description: JKDET pin polarity. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,micbias-voltage: + description: MICBIAS output level select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # VDDA + - 1 # VDDA * 1 + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,vref-impedance: + description: VMID Tie-off impedance select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # open(default) Drop "(default)" Okay, I will drop it. + - 1 # 25KOhms + - 2 # 125KOhms + - 3 # 2.5KOhms + default: 2 You wrote that default is 0 Yes, you are right. I will fix it. + + nuvoton,jack-insert-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 7 + + nuvoton,jack-eject-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + + nuvoton,dmic-clk-threshold: + description: DMIC clock speed expected value. Unit is Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3072000 + You miss nuvoton,key_enable. If this is intentional, mention and shortly explain deviations from pure conversion in the commit msg. Yes, I miss the nuvoton,key_enable. I will add it. + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1b { + #sound-dai-cells = <0>; + compatible = "nuvoton,nau8821"; + reg = <0x1b>; compatible is first property, reg is second. Therefore put sound-dai-cells somewhere further. Okay, I will fix it. Best regards, Krzysztof ________________________________ The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.
