Re: [PATCH 04/10] dt-bindings: treewide: add feature-domains description in binding files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/7/23 16:07, Oleksii Moisieiev wrote:

Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx> writes:

feature-domains is an optional property that allows a peripheral to
refer to one or more feature domain controller(s).

Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controllers. It allows an accurate
representation of the hardware, where various peripherals are connected
to this firewall bus. The firewall can then check the peripheral accesses
before allowing it to probe.

Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
---

Disclaimer: Some error with dtbs_check will be observed as I've
considered the property to be generic, as Rob asked

  Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml  | 4 ++++
  Documentation/devicetree/bindings/dma/st,stm32-dma.yaml      | 4 ++++
  Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml   | 4 ++++
  Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml      | 4 ++++
  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml  | 4 ++++
  .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml      | 4 ++++
  Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml  | 4 ++++
  .../devicetree/bindings/media/cec/st,stm32-cec.yaml          | 4 ++++
  Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml   | 4 ++++
  .../bindings/memory-controllers/st,stm32-fmc2-ebi.yaml       | 4 ++++
  Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml  | 4 ++++
  Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml   | 5 +++++
  Documentation/devicetree/bindings/mmc/arm,pl18x.yaml         | 4 ++++
  Documentation/devicetree/bindings/net/stm32-dwmac.yaml       | 4 ++++
  Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 4 ++++
  .../devicetree/bindings/regulator/st,stm32-vrefbuf.yaml      | 4 ++++
  Documentation/devicetree/bindings/rng/st,stm32-rng.yaml      | 4 ++++
  Documentation/devicetree/bindings/serial/st,stm32-uart.yaml  | 4 ++++
  Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml    | 4 ++++
  Documentation/devicetree/bindings/sound/st,stm32-sai.yaml    | 4 ++++
  .../devicetree/bindings/sound/st,stm32-spdifrx.yaml          | 4 ++++
  Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml     | 4 ++++
  Documentation/devicetree/bindings/spi/st,stm32-spi.yaml      | 4 ++++
  Documentation/devicetree/bindings/usb/dwc2.yaml              | 4 ++++
  24 files changed, 97 insertions(+)

diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index b767ec72a999..daf8dcaef627 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -50,6 +50,10 @@ properties:
    power-domains:
      maxItems: 1
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+

I beliewe feature-domains is generic binding. This means that maxItems
can be implementation dependend. I would rather drop maxItems so the
following format will be possible:

           feature-domains = <&etzpc 1>, <&etzpc 2>, <&some_other_domain 1 2 3 4>
           feature-domain-names = "firewall 1", "firewall 2", "other_domain"


I'd prefer to drop the maxItems as well. I've been told at one point in
the first series to choose a number for this maybe picking a high but
reasonnable number is preferrable.

Based on How to Get Your DT Schema Bindings Accepted in Less than 10 Iterations pdf published by Krzysztof, I see that examples use
minItems/maxItems. But I can't find if it's mandatory


Also I beliewe driver will handle feature-domain-names property so it
will parse feature-domains only related to the firewall.


Yep, in case of multiple feature-domains, it could be nice.

  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 329847ef096a..2236ac95574b 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -82,6 +82,10 @@ properties:
      description: if defined, it indicates that the controller
        supports memory-to-memory transfer
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index e722fbcd8a5f..47ae890f5bd9 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -28,6 +28,10 @@ properties:
    resets:
      maxItems: 1
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 94b75d9f66cd..326a96741f50 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -99,6 +99,10 @@ properties:
wakeup-source: true + feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 995cbf8cefc6..3eb20d67f0fc 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -93,6 +93,10 @@ properties:
    '#size-cells':
      const: 0
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  allOf:
    - if:
        properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 1970503389aa..bc34ae172417 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -59,6 +59,10 @@ properties:
        If not, SPI CLKOUT frequency will not be accurate.
      maximum: 20000000
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
index 04045b932bd2..90d35a2a6504 100644
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -45,6 +45,10 @@ properties:
    '#size-cells':
      const: 0
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  additionalProperties: false
required:
diff --git a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
index 2314a9a14650..f88e3c0e6175 100644
--- a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
@@ -29,6 +29,10 @@ properties:
        - const: cec
        - const: hdmi-cec
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index 6b3e413cedb2..4fa1d14910df 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -36,6 +36,10 @@ properties:
    resets:
      maxItems: 1
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
    port:
      $ref: /schemas/graph.yaml#/$defs/port-base
      unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 14f1833d37c9..63b3d012147b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -45,6 +45,10 @@ properties:
        Reflects the memory layout with four integer values per bank. Format:
        <bank-number> 0 <address of the bank> <size>
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  patternProperties:
    "^.*@[0-4],[a-f0-9]+$":
      additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index 27329c5dc38e..59d770544950 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -44,6 +44,10 @@ properties:
wakeup-source: true + feature-domains:
+    minItems: 1
+    maxItems: 3
+
    pwm:
      type: object
      additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index f84e09a5743b..d5ad097e94ec 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -67,6 +67,11 @@ properties:
    "#size-cells":
      const: 0
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
+
    pwm:
      type: object
      additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 2459a55ed540..6ebedee65153 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -79,6 +79,10 @@ properties:
            - const: rx
            - const: tx
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
    power-domains: true
resets:
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7d..0e408dc85c13 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -93,6 +93,10 @@ properties:
        select RCC clock instead of ETH_REF_CLK.
      type: boolean
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - clocks
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 24a3dbde223b..b9ac20c8bf05 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -55,6 +55,10 @@ properties:
      description: number of clock cells for ck_usbo_48m consumer
      const: 0
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  # Required child nodes:
patternProperties:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index 05f4ad2c7d3a..02cefe4ef42b 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -30,6 +30,10 @@ properties:
    vdda-supply:
      description: phandle to the vdda input analog voltage.
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
index 187b172d0cca..79eb5f5bd252 100644
--- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
@@ -30,6 +30,10 @@ properties:
      type: boolean
      description: If set enable the clock detection management
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 1df8ffe95fc6..893978e7170f 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -70,6 +70,10 @@ properties:
      enum: [1, 2, 4, 8, 12, 14, 16]
      default: 8
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  allOf:
    - $ref: rs485.yaml#
    - $ref: serial.yaml#
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
index b9111d375b93..64c5898e51f8 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -65,6 +65,10 @@ properties:
      $ref: audio-graph-port.yaml#
      unevaluatedProperties: false
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - "#sound-dai-cells"
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 56d206f97a96..9bc08b7645dc 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -48,6 +48,10 @@ properties:
    clock-names:
      maxItems: 3
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
index bc48151b9adb..f00e5db9ee3b 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@@ -50,6 +50,10 @@ properties:
    resets:
      maxItems: 1
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - "#sound-dai-cells"
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
index 8bba965a9ae6..2ac136802467 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -46,6 +46,10 @@ properties:
        - const: tx
        - const: rx
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  required:
    - compatible
    - reg
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index 9ca1a843c820..725c26daabe4 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -59,6 +59,10 @@ properties:
        - const: rx
        - const: tx
+ feature-domains:
+    minItems: 1
+    maxItems: 3
+
  patternProperties:
    "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
      type: object
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index d3506090f8b1..c372caf154fc 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -171,6 +171,10 @@ properties:
tpl-support: true + feature-domains:
+    minItems: 1
+    maxItems: 3
+
  dependencies:
    port: [ usb-role-switch ]
    role-switch-default-mode: [ usb-role-switch ]





[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux