Re: [PATCH v2 45/45] ARM: dts: at91: sam9x75_curiosity: add device tree for sam9x75 curiosity board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/06/2023 22:30, Varshini Rajendran wrote:
> Add device tree file for sam9x75 curiosity board.
> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile                   |   2 +
>  arch/arm/boot/dts/at91-sam9x75_curiosity.dts | 336 +++++++++++++++++++
>  2 files changed, 338 insertions(+)
>  create mode 100644 arch/arm/boot/dts/at91-sam9x75_curiosity.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 59829fc90315..31f357f8e947 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -53,6 +53,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
>  dtb-$(CONFIG_SOC_SAM9X60) += \
>  	at91-sam9x60_curiosity.dtb \
>  	at91-sam9x60ek.dtb
> +dtb-$(CONFIG_SOC_SAM9X7) += \
> +	at91-sam9x75_curiosity.dtb
>  dtb-$(CONFIG_SOC_SAM_V7) += \
>  	at91-kizbox2-2.dtb \
>  	at91-kizbox3-hs.dtb \
> diff --git a/arch/arm/boot/dts/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/at91-sam9x75_curiosity.dts
> new file mode 100644
> index 000000000000..56d3af549201
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-sam9x75_curiosity.dts
> @@ -0,0 +1,336 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board
> + *
> + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
> + */
> +/dts-v1/;
> +#include "sam9x7.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "Microchip SAM9X75 Curiosity";
> +	compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9";
> +
> +	aliases {
> +		i2c0 = &i2c6;
> +		i2c1 = &i2c7;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	clocks {
> +		clock-slowxtal {
> +			clock-frequency = <32768>;
> +		};
> +
> +		clock-mainxtal {
> +			clock-frequency = <24000000>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_key_gpio_default>;
> +		status = "okay";

Why? Did you disable it?

> +
> +		button-user {
> +			label = "USER";
> +			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_PROG1>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_led_gpio_default>;
> +		status = "okay";

Why? Did you disable it?

> +
> +		led-0 {
> +			label = "red";
> +			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		led-1 {
> +			label = "green";
> +			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		led-2 {
> +			label = "blue";
> +			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	memory@20000000 {
> +		device_type = "memory";
> +		reg = <0x20000000 0x10000000>;
> +	};
> +};
> +
> +&dbgu {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_dbgu>;
> +	status = "okay";
> +};
> +
> +&dma0 {
> +	status = "okay";
> +};
> +
> +&ehci0 {
> +	status = "okay";
> +};
> +
> +&flx6 {
> +	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
> +	status = "okay";
> +
> +	i2c6: i2c@600 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_flx6_default>;
> +		i2c-analog-filter;
> +		i2c-digital-filter;
> +		i2c-digital-filter-width-ns = <35>;
> +		status = "okay";

Did you disable it? If so this should be overridden by label...


> +
> +		mcp16502@5b {

Node names should be generic. See also explanation and list of examples
in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +			compatible = "microchip,mcp16502";
> +			reg = <0x5b>;
> +			status = "okay";

Srsly, drop.

> +
> +			regulators {
> +				vdd_3v3: VDD_IO {
> +					regulator-name = "VDD_IO";
> +					regulator-min-microvolt = <3000000>;
> +					regulator-max-microvolt = <3600000>;

...

> +&flx7 {
> +	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
> +	status = "okay";
> +
> +	i2c7: i2c@600 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_flx7_default>;
> +		i2c-analog-filter;
> +		i2c-digital-filter;
> +		i2c-digital-filter-width-ns = <35>;
> +		status = "okay";

Empty bus. Keep disabled. Anyway overrides should be done via label, not
by duplicating children.

> +	};
> +};
> +
> +&ohci0 {
> +	num-ports = <3>;
> +	atmel,vbus-gpio = <0
> +			   &pioC 27 GPIO_ACTIVE_HIGH
> +			   &pioB 18 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb_default>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +
> +	dbgu {
> +		pinctrl_dbgu: dbgu-0 {
> +			atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
> +				      AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> +		};
> +	};
> +
> +	flexcom {
> +		pinctrl_flx6_default: flx6_twi {

No underscors in node names.

This applies everywhere.



Best regards,
Krzysztof




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux