Re: [PATCH] ASoC: dt-bindings: nau8821: Convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 21, 2023 at 05:39:03PM +0800, Seven Lee wrote:
> Convert the NAU8821 audio CODEC bindings to DT schema.

This wasn't sent to the DT list or maintainers, it should be in order to
ensure they can review it.  Copying in the list and leaving the whole
message for context.

> 
> Signed-off-by: Seven Lee <wtli@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/sound/nau8821.txt     |  55 --------
>  .../bindings/sound/nuvoton,nau8821.yaml       | 120 ++++++++++++++++++
>  2 files changed, 120 insertions(+), 55 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/nau8821.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt
> deleted file mode 100644
> index 7c84e7c7327a..000000000000
> --- a/Documentation/devicetree/bindings/sound/nau8821.txt
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -Nuvoton NAU88L21 audio codec
> -
> -This device supports I2C only.
> -
> -Required properties:
> -  - compatible : Must be "nuvoton,nau8821"
> -
> -  - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1).
> -
> -Optional properties:
> -  - nuvoton,jkdet-enable: Enable jack detection via JKDET pin.
> -  - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled,
> -      otherwise pin in high impedance state.
> -  - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down.
> -  - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
> -
> -  - nuvoton,vref-impedance: VREF Impedance selection
> -      0 - Open
> -      1 - 25 kOhm
> -      2 - 125 kOhm
> -      3 - 2.5 kOhm
> -
> -  - nuvoton,micbias-voltage: Micbias voltage level.
> -      0 - VDDA
> -      1 - VDDA
> -      2 - VDDA * 1.1
> -      3 - VDDA * 1.2
> -      4 - VDDA * 1.3
> -      5 - VDDA * 1.4
> -      6 - VDDA * 1.53
> -      7 - VDDA * 1.53
> -
> -  - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
> -  - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
> -
> -  - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock.
> -  - nuvoton,key_enable: Headset button detection switch.
> -
> -Example:
> -
> -  headset: nau8821@1b {
> -      compatible = "nuvoton,nau8821";
> -      reg = <0x1b>;
> -      interrupt-parent = <&gpio>;
> -      interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> -      nuvoton,jkdet-enable;
> -      nuvoton,jkdet-pull-enable;
> -      nuvoton,jkdet-pull-up;
> -      nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
> -      nuvoton,vref-impedance = <2>;
> -      nuvoton,micbias-voltage = <6>;
> -      nuvoton,jack-insert-debounce = <7>;
> -      nuvoton,jack-eject-debounce = <7>;
> -      nuvoton,dmic-clk-threshold = 3072000;
> -  };
> diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
> new file mode 100644
> index 000000000000..728223d20876
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NAU88L21 audio codec
> +
> +maintainers:
> +  - Seven Lee <wtli@xxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: dai-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: nuvoton,nau8821
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  nuvoton,jkdet-enable:
> +    description: Enable jack detection via JKDET pin.
> +    type: boolean
> +
> +  nuvoton,jkdet-pull-enable:
> +    description: Enable JKDET pin pull. If set - pin pull enabled,
> +      otherwise pin in high impedance state.
> +    type: boolean
> +
> +  nuvoton,jkdet-pull-up:
> +    description: Pull-up JKDET pin. If set then JKDET pin is pull up,
> +      otherwise pull down.
> +    type: boolean
> +
> +  nuvoton,jkdet-polarity:
> +    description: JKDET pin polarity.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum:
> +      - 0 # active high
> +      - 1 # active low
> +    default: 1
> +
> +  nuvoton,micbias-voltage:
> +    description: MICBIAS output level select.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum:
> +      - 0 # VDDA
> +      - 1 # VDDA * 1
> +      - 2 # VDDA * 1.1
> +      - 3 # VDDA * 1.2
> +      - 4 # VDDA * 1.3
> +      - 5 # VDDA * 1.4
> +      - 6 # VDDA * 1.53
> +      - 7 # VDDA * 1.53
> +    default: 6
> +
> +  nuvoton,vref-impedance:
> +    description: VMID Tie-off impedance select.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum:
> +      - 0 # open(default)
> +      - 1 # 25KOhms
> +      - 2 # 125KOhms
> +      - 3 # 2.5KOhms
> +    default: 2
> +
> +  nuvoton,jack-insert-debounce:
> +    description: number from 0 to 7 that sets debounce time to 2^(n+2)ms.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 7
> +    default: 7
> +
> +  nuvoton,jack-eject-debounce:
> +    description: number from 0 to 7 that sets debounce time to 2^(n+2)ms.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 7
> +    default: 0
> +
> +  nuvoton,dmic-clk-threshold:
> +    description: DMIC clock speed expected value. Unit is Hz.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 3072000
> +
> +  '#sound-dai-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        codec@1b {
> +            #sound-dai-cells = <0>;
> +            compatible = "nuvoton,nau8821";
> +            reg = <0x1b>;
> +            interrupt-parent = <&gpio>;
> +            interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> +            nuvoton,jkdet-enable;
> +            nuvoton,jkdet-pull-enable;
> +            nuvoton,jkdet-pull-up;
> +            nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
> +            nuvoton,micbias-voltage = <6>;
> +            nuvoton,vref-impedance = <2>;
> +            nuvoton,jack-insert-debounce = <7>;
> +            nuvoton,jack-eject-debounce = <0>;
> +            nuvoton,dmic-clk-threshold = <3072000>;
> +        };
> +    };
> -- 
> 2.25.1
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux