From: Chancel Liu <chancel.liu@xxxxxxx> [ Upstream commit 32cf0046a652116d6a216d575f3049a9ff9dd80d ] There's an issue on SAI synchronous mode that TX/RX side can't get BCLK from RX/TX it sync with if BYP bit is asserted. It's a workaround to fix it that enable SION of IOMUX pad control and assert BCI. For example if TX sync with RX which means both TX and RX are using clk form RX and BYP=1. TX can get BCLK only if the following two conditions are valid: 1. SION of RX BCLK IOMUX pad is set to 1 2. BCI of TX is set to 1 Signed-off-by: Chancel Liu <chancel.liu@xxxxxxx> Acked-by: Shengjiu Wang <shengjiu.wang@xxxxxxxxx> Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@xxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- sound/soc/fsl/fsl_sai.c | 11 +++++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 6d88af5b287fe..b33104715c7ba 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -491,14 +491,21 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_MSEL_MASK, FSL_SAI_CR2_MSEL(sai->mclk_id[tx])); - if (savediv == 1) + if (savediv == 1) { regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP, FSL_SAI_CR2_BYP); - else + if (fsl_sai_dir_is_synced(sai, adir)) + regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs), + FSL_SAI_CR2_BCI, FSL_SAI_CR2_BCI); + else + regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs), + FSL_SAI_CR2_BCI, 0); + } else { regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP, savediv / 2 - 1); + } if (sai->soc_data->max_register >= FSL_SAI_MCTL) { /* SAI is in master mode at this point, so enable MCLK */ diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 697f6690068c8..c5423f81e4560 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -116,6 +116,7 @@ /* SAI Transmit and Receive Configuration 2 Register */ #define FSL_SAI_CR2_SYNC BIT(30) +#define FSL_SAI_CR2_BCI BIT(28) #define FSL_SAI_CR2_MSEL_MASK (0x3 << 26) #define FSL_SAI_CR2_MSEL_BUS 0 #define FSL_SAI_CR2_MSEL_MCLK1 BIT(26) -- 2.39.2
