From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx> The shutdown is called on reboot/shutdown of the machine. At this point the firmware tracing cannot be used anymore but in case of IPC3 it is using and keeping a DMA channel active (dtrace). For Tiger Lake platforms we have a quirk in place to fix rare reboot issues when a DMA was active before rebooting the system. If the tracing is enabled this quirk will be always used and a print appears on the kernel log which might be misleading or not even correct. Release the fw tracing before executing the shutdown to make sure that this known DMA user is cleared away. Reviewed-by: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx> Reviewed-by: Daniel Baluta <daniel.baluta@xxxxxxx> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx> Reviewed-by: Rander Wang <rander.wang@xxxxxxxxx> Reviewed-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> --- sound/soc/sof/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index 9a9d82220fd0..30db685cc5f4 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -504,8 +504,10 @@ int snd_sof_device_shutdown(struct device *dev) if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) cancel_work_sync(&sdev->probe_work); - if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) + if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) { + sof_fw_trace_free(sdev); return snd_sof_shutdown(sdev); + } return 0; } -- 2.37.2