Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../devicetree/bindings/sound/cirrus,cs35l45.yaml | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
index 2ab74f995685..4c9acb8d4c4c 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -62,7 +62,7 @@ patternProperties:
GPIO pin direction. Valid only when 'gpio-ctrl' is 1
0 = Output
1 = Input
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 1
@@ -71,7 +71,7 @@ patternProperties:
GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
0 = Low
1 = High
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 0
@@ -80,7 +80,7 @@ patternProperties:
GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
0 = CMOS
1 = Open Drain
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 0
@@ -90,7 +90,7 @@ patternProperties:
and 'gpio-dir' is 0
0 = Non-inverted, Active High
1 = Inverted, Active Low
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 0
@@ -114,7 +114,7 @@ patternProperties:
0 = High impedance input
1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
2-7 = Reserved
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
default: 0
--
2.34.1
