Since jack detection requires the input subsystem which may not be
desired on small systems it is not built unless required by a driver
that is being built. Drivers using jack detection should use a pattern
like this:
config SND_FOO
tristate "..."
...
select SND_JACK if INPUT=y || INPUT=SND
to ensure that the jack detection API is enabled if the input subsystem
is. If the input subsystem is not enabled then a stub version of the
API is provided.
Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
sound/core/Kconfig | 6 ++++++
sound/core/Makefile | 1 +
2 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/sound/core/Kconfig b/sound/core/Kconfig
index 335d45e..9c4da1c 100644
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -12,6 +12,12 @@ config SND_HWDEP
config SND_RAWMIDI
tristate
+# To be effective this also requires INPUT - users should say:
+# select SND_JACK if INPUT=y || INPUT=SND
+# to avoid having to force INPUT on.
+config SND_JACK
+ bool
+
config SND_SEQUENCER
tristate "Sequencer support"
select SND_TIMER
diff --git a/sound/core/Makefile b/sound/core/Makefile
index da8e685..d57125a 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -7,6 +7,7 @@ snd-y := sound.o init.o memory.o info.o control.o misc.o device.o
snd-$(CONFIG_ISA_DMA_API) += isadma.o
snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o info_oss.o
snd-$(CONFIG_SND_VMASTER) += vmaster.o
+snd-$(CONFIG_SND_JACK) += jack.o
snd-pcm-objs := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \
pcm_memory.o
--
1.5.4.3
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
