In cs_dsp_load_coeff() region_name should be set in the XM/YM/ZM cases otherwise any errors will log the region as "Unknown". While doing this also change one error message that logged the region type ID to log the region_name instead. This makes it consistent with other messages in the same function. Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx> --- drivers/firmware/cirrus/cs_dsp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/cirrus/cs_dsp.c b/drivers/firmware/cirrus/cs_dsp.c index d7e46a57ecf9..6a9aa97373d3 100644 --- a/drivers/firmware/cirrus/cs_dsp.c +++ b/drivers/firmware/cirrus/cs_dsp.c @@ -2124,6 +2124,7 @@ static int cs_dsp_load_coeff(struct cs_dsp *dsp, const struct firmware *firmware file, blocks, le32_to_cpu(blk->len), type, le32_to_cpu(blk->id)); + region_name = cs_dsp_mem_region_name(type); mem = cs_dsp_find_region(dsp, type); if (!mem) { cs_dsp_err(dsp, "No base for region %x\n", type); @@ -2147,8 +2148,8 @@ static int cs_dsp_load_coeff(struct cs_dsp *dsp, const struct firmware *firmware reg = dsp->ops->region_to_reg(mem, reg); reg += offset; } else { - cs_dsp_err(dsp, "No %x for algorithm %x\n", - type, le32_to_cpu(blk->id)); + cs_dsp_err(dsp, "No %s for algorithm %x\n", + region_name, le32_to_cpu(blk->id)); } break; -- 2.30.2