The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones. Add a YAML DT binding document for this device. Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx> --- Changes since v2: - drop incorrect MAINTAINERs addition - Change bias-sense-ua to bias-sense-microamp - Use consistant quotes - Drop some unneeded allof's Thanks, Charles .../bindings/sound/cirrus,cs42l43.yaml | 313 ++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml new file mode 100644 index 0000000000000..7a6de938b11d1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml @@ -0,0 +1,313 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42L43 Audio CODEC + +maintainers: + - patches@xxxxxxxxxxxxxxxxxxxxx + +description: | + The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface + (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed + for portable applications. It provides a high dynamic range, stereo + DAC for headphone output, two integrated Class D amplifiers for + loudspeakers, and two ADCs for wired headset microphone input or + stereo line input. PDM inputs are provided for digital microphones. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - cirrus,cs42l43 + + reg: + maxItems: 1 + + vdd-p-supply: + description: + Power supply for the high voltage interface. + + vdd-a-supply: + description: + Power supply for internal analog circuits. + + vdd-d-supply: + description: + Power supply for internal digital circuits. Can be internally supplied. + + vdd-io-supply: + description: + Power supply for external interface and internal digital logic. + + vdd-cp-supply: + description: + Power supply for the amplifier 3 and 4 charge pump. + + vdd-amp-supply: + description: + Power supply for amplifier 1 and 2. + + reset-gpios: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + clocks: + items: + - description: Synchronous audio clock provided on mclk_in. + + clock-names: + const: mclk + + cirrus,bias-low: + type: boolean + description: + Select a 1.8V headset micbias rather than 2.8V. + + cirrus,bias-sense-microamp: + description: + Current at which the headset micbias sense clamp will engage, 0 to + disable. + enum: [ 0, 14, 23, 41, 50, 60, 68, 86, 95 ] + default: 0 + + cirrus,bias-ramp-ms: + description: + Time in milliseconds the hardware allows for the headset micbias to + ramp up. + enum: [ 10, 40, 90, 170 ] + default: 170 + + cirrus,detect-us: + description: + Time in microseconds the type detection will run for. Long values will + cause more audible effects, but give more accurate detection. + enum: [ 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 ] + default: 10000 + + cirrus,button-automute: + type: boolean + description: + Enable the hardware automuting of decimator 1 when a headset button is + pressed. + + cirrus,buttons-ohms: + description: + Impedance in Ohms for each headset button, these should be listed in + ascending order. + minItems: 1 + maxItems: 6 + + cirrus,tip-debounce-ms: + description: + Software debounce on tip sense triggering in milliseconds. + default: 0 + + cirrus,tip-invert: + type: boolean + description: + Indicates tip detect polarity, inverted implies open-circuit whilst the + jack is inserted. + + cirrus,tip-disable-pullup: + type: boolean + description: + Indicates if the internal pullup on the tip detect should be disabled. + + cirrus,tip-fall-db-ms: + description: + Time in milliseconds a falling edge on the tip detect should be hardware + debounced for. Note the falling edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,tip-rise-db-ms: + description: + Time in milliseconds a rising edge on the tip detect should be hardware + debounced for. Note the rising edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,use-ring-sense: + type: boolean + description: + Indicates if the ring sense should be used. + + cirrus,ring-invert: + type: boolean + description: + Indicates ring detect polarity, inverted implies open-circuit whilst the + jack is inserted. + + cirrus,ring-disable-pullup: + type: boolean + description: + Indicates if the internal pullup on the ring detect should be disabled. + + cirrus,ring-fall-db-ms: + description: + Time in milliseconds a falling edge on the ring detect should be hardware + debounced for. Note the falling edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,ring-rise-db-ms: + description: + Time in milliseconds a rising edge on the ring detect should be hardware + debounced for. Note the rising edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + pinctrl: + type: object + $ref: /schemas/pinctrl/pinctrl.yaml# + additionalProperties: false + + properties: + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + items: + - description: A phandle to the CODEC pinctrl node + minimum: 0 + - const: 0 + - const: 0 + - const: 3 + + patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/cirrus-cs42l43-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/cirrus-cs42l43-state" + additionalProperties: false + + spi: + type: object + $ref: /schemas/spi/spi-controller.yaml# + unevaluatedProperties: false + +$defs: + cirrus-cs42l43-state: + type: object + + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + properties: + groups: + enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ] + + pins: + enum: [ gpio1, gpio2, gpio3, + asp_dout, asp_fsync, asp_bclk, + pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data, + i2c_sda, i2c_scl, + spi_miso, spi_sck, spi_ssb ] + + function: + enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ] + + drive-strength: + description: Set drive strength in mA + enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ] + + input-debounce: + description: Set input debounce in uS + enum: [ 0, 85 ] + +required: + - compatible + - reg + - vdd-p-supply + - vdd-a-supply + - vdd-io-supply + - vdd-cp-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cs42l43: codec@1a { + compatible = "cirrus,cs42l43"; + reg = <0x1a>; + + vdd-p-supply = <&vdd5v0>; + vdd-a-supply = <&vdd1v8>; + vdd-io-supply = <&vdd1v8>; + vdd-cp-supply = <&vdd1v8>; + vdd-amp-supply = <&vdd5v0>; + + reset-gpios = <&gpio 0>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + #sound-dai-cells = <1>; + + clocks = <&clks 0>; + clock-names = "mclk"; + + cs42l43_pins: pinctrl { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cs42l43_pins 0 0 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: default-state { + shutter-pins { + groups = "gpio3"; + function = "mic-shutter"; + }; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&cs42l43_pins 1 0>; + + sensor@0 { + compatible = "bosch,bme680"; + reg = <0>; + spi-max-frequency = <1400000>; + }; + }; + }; + }; -- 2.30.2
