SoundWire code as it is only supports Bulk register writes and
it does not support multi-register writes.
Any drivers that set can_multi_write and use regmap_multi_reg_write() will
easily endup with programming the hardware incorrectly without any errors.
So, add this check in bus code to be able to validate the drivers config.
Fixes: 522272047dc6 ("regmap: sdw: Remove 8-bit value size restriction")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
drivers/base/regmap/regmap-sdw.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/base/regmap/regmap-sdw.c b/drivers/base/regmap/regmap-sdw.c
index 09899ae99fc1..159c0b740b00 100644
--- a/drivers/base/regmap/regmap-sdw.c
+++ b/drivers/base/regmap/regmap-sdw.c
@@ -59,6 +59,10 @@ static int regmap_sdw_config_check(const struct regmap_config *config)
if (config->pad_bits != 0)
return -ENOTSUPP;
+ /* Only bulk writes are supported not multi-register writes */
+ if (config->can_multi_write)
+ return -ENOTSUPP;
+
return 0;
}
--
2.21.0
