RE: Fwd: [Bug 217440] New: ALC236 audio disappears from HP 15z-fc000 on warm boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Takashi Iwai <tiwai@xxxxxxx>
> Sent: Monday, May 15, 2023 9:40 PM
> To: Joseph C. Sible <josephcsible@xxxxxxxxx>
> Cc: Bagas Sanjaya <bagasdotme@xxxxxxxxx>; regressions@xxxxxxxxxxxxxxx;
> Kailang <kailang@xxxxxxxxxxx>; perex@xxxxxxxx; tiwai@xxxxxxxx;
> alsa-devel@xxxxxxxxxxxxxxxx
> Subject: Re: Fwd: [Bug 217440] New: ALC236 audio disappears from HP
> 15z-fc000 on warm boot
> 
> 
> External mail.
> 
> 
> 
> On Sun, 14 May 2023 23:48:55 +0200,
> Joseph C. Sible wrote:
> >
> > On 5/14/23, Takashi Iwai wrote:
> > > The patch changes two places (the change in alc_shutup_pins() and
> > > alc256_shutup()), and I guess the latter is the culprit.  Could you
> > > verify that only reverting the latter fixes the problem?
> >
> > Yes, only reverting the latter fixes the problem. I just tried a
> > kernel consisting of 6.3.2 plus the below change, and it works fine:
> >
> > --- a/sound/pci/hda/patch_realtek.c
> > +++ b/sound/pci/hda/patch_realtek.c
> > @@ -3638,8 +3638,7 @@ static void alc256_shutup(struct hda_codec
> *codec)
> >         /* If disable 3k pulldown control for alc257, the Mic
> > detection will not work correctly
> >          * when booting with headset plugged. So skip setting it for
> > the codec alc257
> >          */
> > -       if (codec->core.vendor_id != 0x10ec0236 &&
> > -           codec->core.vendor_id != 0x10ec0257)
> > +       if (codec->core.vendor_id != 0x10ec0257)
> >                 alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
> >
> >         if (!spec->no_shutup_pins)
> 
> OK, thanks for confirmation.
> 
> Kailang, could you check this issue?

OK. I will take it a look for these days.

> Judging from the comment there:
> 
>         /* 3k pull low control for Headset jack. */
>         /* NOTE: call this before clearing the pin, otherwise codec stalls */
>         /* If disable 3k pulldown control for alc257, the Mic detection will
> not work correctly
>          * when booting with headset plugged. So skip setting it for the
> codec alc257
>          */
> 
> ... it seems that the codec got screwed with this setup, which leaded to the
> non-response at the probe after reboot.
> 
> In the worst case, I'll revert that part.
> 
> 
> thanks,
> 
> Takashi
> 
> ------Please consider the environment before printing this e-mail.




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux