From: Krzysztof Helt <krzysztof.h1@xxxxx> Fix copy-paste error with Interwave instead of ad1848 chip condition. Limit opti93x cards capture formats to only linear ones. Signed-off-by: Krzysztof Helt <krzysztof.h1@xxxxx> --- Thank you Rene for collecting, testing and reviewing my patches. I found one mistake in the series and this patch fixes it. I have also limited capture formats for opti93x chips because the opti93x manual states that it supports mu-law, a-law and ADPCM decompression. The word "decompression" probably suggest that compression (recording) is not possible as its manufacturer could just state the card supported mu-law, a-law and ADPCM. Regards, Krzysztof diff -urp linux-alsa/sound/isa/wss/wss_lib.c linux-mm/sound/isa/wss/wss_lib.c --- linux-alsa/sound/isa/wss/wss_lib.c 2008-07-18 22:47:02.056943647 +0200 +++ linux-mm/sound/isa/wss/wss_lib.c 2008-07-18 22:56:38.200949874 +0200 @@ -1460,14 +1460,16 @@ static int snd_wss_capture_open(struct s runtime->hw = snd_wss_capture; /* hardware limitation of older chipsets */ - if (chip->hardware == WSS_HW_INTERWAVE && chip->dma1 > 3) + if (chip->hardware & WSS_HW_AD1848_MASK) runtime->hw.formats &= ~(SNDRV_PCM_FMTBIT_IMA_ADPCM | SNDRV_PCM_FMTBIT_S16_BE); /* hardware limitation of cheap chips */ if (chip->hardware == WSS_HW_CS4235 || - chip->hardware == WSS_HW_CS4239) - runtime->hw.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE; + chip->hardware == WSS_HW_CS4239 || + chip->hardware == WSS_HW_OPTI93X) + runtime->hw.formats = SNDRV_PCM_FMTBIT_U8 | + SNDRV_PCM_FMTBIT_S16_LE; snd_pcm_limit_isa_dma_size(chip->dma2, &runtime->hw.buffer_bytes_max); snd_pcm_limit_isa_dma_size(chip->dma2, &runtime->hw.period_bytes_max); ---------------------------------------------------------------------- W kosciele tez zdarzaja sie wpadki! Smieszny filmik >>> http://link.interia.pl/f1e61 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
