-----Original Message----- From: Mark Brown <broonie@xxxxxxxxxx> Sent: Thursday, May 4, 2023 21:39 To: David.Rau.opensource <David.Rau.opensource@xxxxxxxxxxxxxx> Cc: support.opensource@xxxxxxxxxxx; lgirdwood@xxxxxxxxx; perex@xxxxxxxx; tiwai@xxxxxxxx; alsa-devel@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx Subject: Re: [PATCH] ASoC: da7219: Add Jack insertion detection polarity selection On Thu, May 04, 2023 at 08:22:18AM +0000, David Rau wrote: > +choice > + bool "DA7219 Jack insertion detection polarity selection" > + default DA7219_DEFAULT_JACK_INSERTION_POLARITY if (SND_SOC_DA7219) > + > +config DA7219_DEFAULT_JACK_INSERTION_POLARITY > + bool "Default polarity" > + depends on SND_SOC_DA7219 > + help > + Select this option if your DA7219 codec with default Jack insertion detection polarity (Low). > + > +config DA7219_INVERTED_JACK_INSERTION_POLARITY > + bool "Inverted polarity" > + depends on SND_SOC_DA7219 > + help > + Select this option if your DA7219 codec with inverted Jack insertion detection polarity (High). > I would expect these things to be fixed for a given board and therefore configured with a DT property rather than a kernel config. It should be possible to use the same kernel on multiple boards. Thanks for the kind suggestion. Now I am working on another implementation that retrieve DT data for multiple boards like you said. > + > +endchoice > + > +endif # SND_SOC_DA7219 > + > config SND_SOC_DA732X > tristate > depends on I2C > diff --git a/sound/soc/codecs/da7219-aad.c > b/sound/soc/codecs/da7219-aad.c index 993a0d00bc48..9d16112cff6b > 100644 > --- a/sound/soc/codecs/da7219-aad.c > +++ b/sound/soc/codecs/da7219-aad.c > @@ -879,6 +879,18 @@ static void da7219_aad_handle_gnd_switch_time(struct snd_soc_component *componen > } > } > > +static void da7219_aad_handle_polarity(struct snd_soc_component > +*component) { > + snd_soc_component_write(component, 0xF0, 0x8B); > + > + if (IS_ENABLED(CONFIG_DA7219_DEFAULT_JACK_INSERTION_POLARITY)) > + snd_soc_component_write(component, 0x75, 0x80); > + else if (IS_ENABLED(CONFIG_DA7219_INVERTED_JACK_INSERTION_POLARITY)) > + snd_soc_component_write(component, 0x75, 0x00); > + > + snd_soc_component_write(component, 0xF0, 0x00); } > + > /* > * Suspend/Resume > */ > @@ -955,8 +967,12 @@ int da7219_aad_init(struct snd_soc_component *component) > snd_soc_component_update_bits(component, DA7219_ACCDET_CONFIG_1, > DA7219_BUTTON_CONFIG_MASK, 0); > > + /* Handle the default ground switch delay time */ > da7219_aad_handle_gnd_switch_time(component); > > + /* Handle the Jack insertion detection polarity */ > + da7219_aad_handle_polarity(component); > + > da7219_aad->aad_wq = create_singlethread_workqueue("da7219-aad"); > if (!da7219_aad->aad_wq) { > dev_err(component->dev, "Failed to create aad workqueue\n"); > -- > 2.17.1 >