Re: [alsa-devel@xxxxxxxxxxxxxxxx: [PATCH 3/5] ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 04 May 2023 09:35:38 +0200,
Takashi Iwai wrote:
> 
> On Thu, 04 May 2023 03:09:45 +0200,
> Mark Brown wrote:
> > 
> > Hi,
> > 
> > Here's another mail (one of several in this series) that got completely
> > mangled by the alsa-project.org mailman to the point of unusability.  I
> > didn't see any response to my last mail about this, is there any news on
> > fixing mailman to not do this?  It's extremely disruptive to working
> > with lore.
> 
> It seems that alsa-project.org mailman re-sends the post with
> xxx@xxxxxxxxxxxxxxxx address sometimes, indeed.  I don't know the
> condition, but now I noticed it while checking the pending approvals.

And, I guess it happens when a post comes from a non-subscriber.
(But not sure whether this happens always...)
It waits for approval, but also mangles the sender address and co.
This behavior is new after the mail server update.

> Those that appeared in the list wrongly were likely the posts I
> approved without knowing them being superfluously resent ones.
> 
> Jaroslav, could you check your mailman configuration?

So, please check the configuration.  As of now, the post from
non-subscriber becomes confusing and unusable for b4.


thanks,

Takashi

> 
> 
> thanks,
> 
> Takashi
> 
> > Thanks,
> > Mark
> > Subject: [PATCH 3/5] ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe
> > From: AngeloGioacchino Del Regno via Alsa-devel <alsa-devel@xxxxxxxxxxxxxxxx>
> > Date: Wed, 03 May 2023 13:34:11 +0200
> > Message-Id: <168311377075.26.14919941665402646886@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > MIME-Version: 1.0
> > Content-Transfer-Encoding: 7bit
> > 
> > Use devm_pm_runtime_enable() and pm_runtime_resume_and_get() to
> > to simplify the probe function.
> > 
> > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> > ---
> >  sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 22 ++++++++++++----------
> >  1 file changed, 12 insertions(+), 10 deletions(-)
> > 
> > diff --git a/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c b/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> > index 9e45efeada55..a54c16e0aa05 100644
> > --- a/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> > +++ b/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> > @@ -3179,16 +3179,16 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
> >  
> >  	mt8195_afe_parse_of(afe, pdev->dev.of_node);
> >  
> > -	pm_runtime_enable(dev);
> > -	if (!pm_runtime_enabled(dev)) {
> > -		ret = mt8195_afe_runtime_resume(dev);
> > -		if (ret)
> > -			return ret;
> > -	}
> > -
> >  	/* enable clock for regcache get default value from hw */
> >  	afe_priv->pm_runtime_bypass_reg_ctl = true;
> > -	pm_runtime_get_sync(dev);
> > +
> > +	ret = devm_pm_runtime_enable(dev);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = pm_runtime_resume_and_get(dev);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to resume device\n");
> >  
> >  	afe->regmap = devm_regmap_init_mmio(&pdev->dev, afe->base_addr,
> >  					    &mt8195_afe_regmap_config);
> > @@ -3238,7 +3238,10 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
> >  
> >  	mt8195_afe_init_registers(afe);
> >  
> > -	pm_runtime_put_sync(dev);
> > +	ret = pm_runtime_put_sync(dev);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to suspend device\n");
> > +
> >  	afe_priv->pm_runtime_bypass_reg_ctl = false;
> >  
> >  	regcache_cache_only(afe->regmap, true);
> > @@ -3248,7 +3251,6 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
> >  
> >  err_pm_put:
> >  	pm_runtime_put_sync(dev);
> > -	pm_runtime_disable(dev);
> >  
> >  	return ret;
> >  }
> > -- 
> > 2.40.1



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux