On Wed, 26 Apr 2023 03:30:59 +0200, Reaper Li wrote: > > From: jasontao <jasontao@xxxxxxxxxxx> > > Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for > Glenfly Gpus. > > - In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware > limitation, need to increase hdac interrupt interval. > - In azx_first_init, enable polling mode for Glenfly Gpu. When the codec > complete the command, it sends interrupt and writes response entries to > memory, howerver, the write requests sometimes are not actually > synchronized to memory when driver handle hdac interrupt on Glenfly Gpus. > If the RIRB status is not updated in the interrupt handler, > azx_rirb_get_response keeps trying to recevie a response from rirb until > 1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue. > - In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need > driver to do actual clean-ups for the linked codec when switch from one > codec to another. > > Signed-off-by: jasontao <jasontao@xxxxxxxxxxx> > Signed-off-by: Reaper Li <reaperlioc@xxxxxxxxxxx> > --- > v3: fix warnings for the patch. > v2: add some comments for code and details in the commit log. Thanks, applied now. Takashi
