... and also use more pre-defined constants on the way (some of which required adjustment). Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@xxxxxx> --- This patch series needs to be applied on top of the patch titled "ALSA: emu10k1: use more existing defines instead of open-coded numbers". --- include/sound/emu10k1.h | 9 +++++---- sound/pci/emu10k1/emu10k1_main.c | 20 ++++++-------------- 2 files changed, 11 insertions(+), 18 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 5958cae819fd..05a09826eef0 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -852,10 +852,11 @@ #define A_SPDIF_MUTED 0x000000c0 #define A_I2S_CAPTURE_RATE_MASK 0x00000e00 /* This sets the capture PCM rate, but it is */ -#define A_I2S_CAPTURE_48000 0x00000000 /* unclear if this sets the ADC rate as well. */ -#define A_I2S_CAPTURE_192000 0x00000200 -#define A_I2S_CAPTURE_96000 0x00000400 -#define A_I2S_CAPTURE_44100 0x00000800 +#define A_I2S_CAPTURE_RATE 0x03090076 /* unclear if this sets the ADC rate as well. */ +#define A_I2S_CAPTURE_48000 0x0 +#define A_I2S_CAPTURE_192000 0x1 +#define A_I2S_CAPTURE_96000 0x2 +#define A_I2S_CAPTURE_44100 0x4 #define A_EHC_SRC48_MASK 0x0000e000 /* This sets the playback PCM rate on the P16V */ #define A_EHC_SRC48_BYPASS 0x00000000 diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index e53eb7fd0883..3aca01c70ccb 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -186,10 +186,7 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir) if (emu->card_capabilities->ca0151_chip) { /* audigy2 */ /* Hacks for Alice3 to work independent of haP16V driver */ /* Setup SRCMulti_I2S SamplingRate */ - tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0); - tmp &= 0xfffff1ff; - tmp |= (0x2<<9); - snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp); + snd_emu10k1_ptr_write(emu, A_I2S_CAPTURE_RATE, 0, A_I2S_CAPTURE_96000); /* Setup SRCSel (Enable Spdif,I2S SRCMulti) */ snd_emu10k1_ptr20_write(emu, SRCSel, 0, 0x14); @@ -206,25 +203,20 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir) /* Hacks for Alice3 to work independent of haP16V driver */ dev_info(emu->card->dev, "Audigy2 value: Special config.\n"); /* Setup SRCMulti_I2S SamplingRate */ - tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0); - tmp &= 0xfffff1ff; - tmp |= (0x2<<9); - snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp); + snd_emu10k1_ptr_write(emu, A_I2S_CAPTURE_RATE, 0, A_I2S_CAPTURE_96000); /* Setup SRCSel (Enable Spdif,I2S SRCMulti) */ - outl(0x600000, emu->port + 0x20); - outl(0x14, emu->port + 0x24); + snd_emu10k1_ptr20_write(emu, P17V_SRCSel, 0, 0x14); /* Setup SRCMulti Input Audio Enable */ - outl(0x7b0000, emu->port + 0x20); - outl(0xFF000000, emu->port + 0x24); + snd_emu10k1_ptr20_write(emu, P17V_MIXER_I2S_ENABLE, 0, 0xFF000000); /* Setup SPDIF Out Audio Enable */ /* The Audigy 2 Value has a separate SPDIF out, * so no need for a mixer switch */ - outl(0x7a0000, emu->port + 0x20); - outl(0xFF000000, emu->port + 0x24); + snd_emu10k1_ptr20_write(emu, P17V_MIXER_SPDIF_ENABLE, 0, 0xFF000000); + tmp = inw(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */ outw(tmp, emu->port + A_IOCFG); } -- 2.40.0.152.g15d061e6df