[PATCH 4/6] ASoC: cs35l56: Always wait for firmware boot in runtime-resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



--- Begin Message ---
When we are resuming from a system suspend the CS35L56 has probably
been hard reset (usually a power-on reset). So we must wait for the
firmware to boot. On SoundWire we also need it to re-initialize before
we can read the registers to check the CS35L56 state.

The simplest way to handle this is for runtime-resume to always wait
for firmware boot. If the firmware is already booted the overhead is
only one register read.

The system-resume will have to runtime-resume the driver anyway before
attempting any register access. So this will automatically include the
wait for initialization on SoundWire.

Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
---
 sound/soc/codecs/cs35l56.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c
index 62c44276c121..74abcf1c604a 100644
--- a/sound/soc/codecs/cs35l56.c
+++ b/sound/soc/codecs/cs35l56.c
@@ -1102,10 +1102,8 @@ int cs35l56_runtime_resume_common(struct cs35l56_private *cs35l56)
 	unsigned int val;
 	int ret;
 
-	if (!cs35l56->can_hibernate) {
-		regcache_cache_only(cs35l56->regmap, false);
+	if (!cs35l56->can_hibernate)
 		goto out_sync;
-	}
 
 	if (!cs35l56->sdw_peripheral) {
 		/*
@@ -1120,19 +1118,19 @@ int cs35l56_runtime_resume_common(struct cs35l56_private *cs35l56)
 			     CS35L56_CONTROL_PORT_READY_US + 400);
 	}
 
-	regcache_cache_only(cs35l56->regmap, false);
-
-	ret = cs35l56_wait_for_firmware_boot(cs35l56);
-	if (ret) {
-		dev_err(cs35l56->dev, "Hibernate wake failed: %d\n", ret);
-		goto err;
-	}
-
-	ret = cs35l56_mbox_send(cs35l56, CS35L56_MBOX_CMD_PREVENT_AUTO_HIBERNATE);
-	if (ret)
-		goto err;
-
 out_sync:
+	regcache_cache_only(cs35l56->regmap, false);
+
+	ret = cs35l56_wait_for_firmware_boot(cs35l56);
+	if (ret) {
+		dev_err(cs35l56->dev, "Hibernate wake failed: %d\n", ret);
+		goto err;
+	}
+
+	ret = cs35l56_mbox_send(cs35l56, CS35L56_MBOX_CMD_PREVENT_AUTO_HIBERNATE);
+	if (ret)
+		goto err;
+
 	/* BOOT_DONE will be 1 if the amp reset */
 	regmap_read(cs35l56->regmap, CS35L56_IRQ1_EINT_4, &val);
 	if (val & CS35L56_OTP_BOOT_DONE_MASK) {
-- 
2.30.2




--- End Message ---

[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux