Re: [PATCH v3 56/65] clk: ingenic: cgu: Switch to determine_rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Maxime,

Le mardi 04 avril 2023 à 12:11 +0200, Maxime Ripard a écrit :
> The Ingenic CGU clocks implements a mux with a set_parent hook, but
> doesn't provide a determine_rate implementation.
> 
> This is a bit odd, since set_parent() is there to, as its name
> implies,
> change the parent of a clock. However, the most likely candidate to
> trigger that parent change is a call to clk_set_rate(), with
> determine_rate() figuring out which parent is the best suited for a
> given rate.
> 
> The other trigger would be a call to clk_set_parent(), but it's far
> less
> used, and it doesn't look like there's any obvious user for that
> clock.
> 
> So, the set_parent hook is effectively unused, possibly because of an
> oversight. However, it could also be an explicit decision by the
> original author to avoid any reparenting but through an explicit call
> to
> clk_set_parent().

As I said in the v2 (IIRC), clk_set_parent() is used when re-parenting
from the device tree.

> 
> The driver does implement round_rate() though, which means that we
> can
> change the rate of the clock, but we will never get to change the
> parent.
> 
> However, It's hard to tell whether it's been done on purpose or not.
> 
> Since we'll start mandating a determine_rate() implementation, let's
> convert the round_rate() implementation to a determine_rate(), which
> will also make the current behavior explicit. And if it was an
> oversight, the clock behaviour can be adjusted later on.

So just to be sure, this patch won't make clk_set_rate() automatically
switch parents, right?

Allowing automatic re-parenting sounds like a huge can of worms...

Cheers,
-Paul

> 
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
> ---
>  drivers/clk/ingenic/cgu.c | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
> index 1f7ba30f5a1b..0c9c8344ad11 100644
> --- a/drivers/clk/ingenic/cgu.c
> +++ b/drivers/clk/ingenic/cgu.c
> @@ -491,22 +491,23 @@ ingenic_clk_calc_div(struct clk_hw *hw,
>         return div;
>  }
>  
> -static long
> -ingenic_clk_round_rate(struct clk_hw *hw, unsigned long req_rate,
> -                      unsigned long *parent_rate)
> +static int ingenic_clk_determine_rate(struct clk_hw *hw,
> +                                     struct clk_rate_request *req)
>  {
>         struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
>         const struct ingenic_cgu_clk_info *clk_info =
> to_clk_info(ingenic_clk);
>         unsigned int div = 1;
>  
>         if (clk_info->type & CGU_CLK_DIV)
> -               div = ingenic_clk_calc_div(hw, clk_info,
> *parent_rate, req_rate);
> +               div = ingenic_clk_calc_div(hw, clk_info, req-
> >best_parent_rate,
> +                                          req->rate);
>         else if (clk_info->type & CGU_CLK_FIXDIV)
>                 div = clk_info->fixdiv.div;
>         else if (clk_hw_can_set_rate_parent(hw))
> -               *parent_rate = req_rate;
> +               req->best_parent_rate = req->rate;
>  
> -       return DIV_ROUND_UP(*parent_rate, div);
> +       req->rate = DIV_ROUND_UP(req->best_parent_rate, div);
> +       return 0;
>  }
>  
>  static inline int ingenic_clk_check_stable(struct ingenic_cgu *cgu,
> @@ -626,7 +627,7 @@ static const struct clk_ops ingenic_clk_ops = {
>         .set_parent = ingenic_clk_set_parent,
>  
>         .recalc_rate = ingenic_clk_recalc_rate,
> -       .round_rate = ingenic_clk_round_rate,
> +       .determine_rate = ingenic_clk_determine_rate,
>         .set_rate = ingenic_clk_set_rate,
>  
>         .enable = ingenic_clk_enable,
> 





[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux