Re: [PATCH v2 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/04/2023 16:21, Rob Herring wrote:
>> diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
>> index c283c594fb5c..883b8be9be1b 100644
>> --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
>> +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
>> @@ -86,7 +86,7 @@ properties:
>>    qcom,ports-sinterval-low:
>>      $ref: /schemas/types.yaml#/definitions/uint8-array
>>      description:
>> -      Sample interval low of each data port.
>> +      Sample interval (only lowest byte) of each data port.
>>        Out ports followed by In ports. Used for Sample Interval calculation.
>>        Value of 0xff indicates that this option is not implemented
>>        or applicable for the respective data port.
>> @@ -94,6 +94,19 @@ properties:
>>      minItems: 3
>>      maxItems: 16
>>  
>> +  qcom,ports-sinterval:
>> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>> +    description:
>> +      Sample interval of each data port.
>> +      Out ports followed by In ports. Used for Sample Interval calculation.
>> +      Value of 0xffff indicates that this option is not implemented
>> +      or applicable for the respective data port.
>> +      More info in MIPI Alliance SoundWire 1.0 Specifications.
>> +    minItems: 3
>> +    maxItems: 16
>> +    items:
>> +      maximum: 0xffff
> 
> Why not use uint16-array?

Because I am afraid it will grow in next version to 24 or 32 bits. I can
change easily maximum, but if I put here uint16-array, all DTS will have
/bytes 16/ annotation.


Best regards,
Krzysztof




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux