Re: [PATCH v4 1/5] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/03/2023 09:48, Herve Codina wrote:
> The Lantiq PEF2256 is a framer and line interface component designed to
> fulfill all required interfacing between an analog E1/T1/J1 line and the
> digital PCM system highway/H.100 bus.
> 
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
> ---
>  .../bindings/mfd/lantiq,pef2256.yaml          | 270 ++++++++++++++++++
>  1 file changed, 270 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml


> +  pinctrl:
> +    $ref: /schemas/pinctrl/pinctrl.yaml#
> +
> +    patternProperties:
> +      '-pins$':
> +        type: object
> +        $ref: /schemas/pinctrl/pincfg-node.yaml#
> +
> +        properties:
> +          pins:
> +            enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
> +
> +          function:
> +            enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
> +                    SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
> +                    GPI, GPOH, GPOL ]
> +
> +        additionalProperties: false

Move it up (Put it after $ref: /schemas/pinctrl/pincfg-node.yaml#)

> +
> +        required:
> +          - pins
> +          - function
> +
> +    additionalProperties: false

Put it after $ref


> +
> +  lantiq,line-interface:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum: [e1, t1j1]
> +    default: e1
> +    description: |
> +      The line interface type
> +        - e1: E1 line
> +        - t1j1: T1/J1 line
> +
> +  lantiq,frame-format:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      The line interface frame format.
> +
> +  lantiq,data-rate-bps:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [2048000, 4096000, 8192000, 16384000]
> +    default: 2048000
> +    description:
> +      Data rate (bit per seconds) on the system highway.
> +
> +  lantiq,clock-falling-edge:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Data is sent on falling edge of the clock (and received on the rising
> +      edge). If 'clock-falling-edge' is not present, data is sent on the
> +      rising edge (and received on the falling edge).
> +
> +  lantiq,channel-phase:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +    default: 0
> +    description:
> +      The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit
> +      time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data
> +      rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
> +      bit/s, the data (all 32 8bit) present in the frame are interleave with
> +      unused time-slots. The lantiq,channel-phase property allows to set the
> +      correct alignment of the interleave mechanism.
> +      For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
> +      lantiq,channel-phase = 2, the interleave schema with unused time-slots
> +      (nu) and used time-slots (XX) for TSi is
> +        nu nu XX nu nu nu XX nu nu nu XX nu
> +        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> +      With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
> +      interleave schema is
> +        nu XX nu nu nu XX nu nu nu XX nu nu
> +        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> +      With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
> +      lantiq,channel-phase = 1, the interleave schema is
> +        nu    XX    nu    XX    nu    XX
> +        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
> +
> +  lantiq,subordinate:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      If present, the pef2256 works in subordinate mode. In this mode it
> +      synchronizes on line interface clock signals. Otherwise, it synchronizes
> +      on internal clocks.
> +
> +patternProperties:
> +  '^codec([0-9]|[1-2][0-9]|3[0-1])?$':

Missing '-' before suffix numbers.

> +    type: object
> +    $ref: /schemas/sound/dai-common.yaml
> +    description:
> +      Codec provided by the pef2256. This codec allows to use some of the PCM
> +      system highway time-slots as audio channels to transport audio data over
> +      the E1/T1/J1 lines.
> +      The time-slots used by the codec must be set and so, the properties
> +      'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
> +      'dai-tdm-slot-rx-mask' must be present in the sound card node for
> +      sub-nodes that involve the codec. The codec uses 8bit time-slots.
> +      'dai-tdm-tdm-slot-with' must be set to 8.
> +      The tx and rx masks define the pef2256 time-slots assigned to the codec.
> +
> +    properties:
> +      compatible:
> +        const: lantiq,pef2256-codec
> +
> +      '#sound-dai-cells':
> +        const: 0
> +
> +    required:
> +      - compatible
> +      - '#sound-dai-cells'
> +
> +    unevaluatedProperties: false

Put it after $ref

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +
> +allOf:
> +  - if:
> +      properties:
> +        lantiq,line-interface:
> +          contains:
> +            const: e1
> +    then:
> +      properties:
> +        lantiq,frame-format:
> +          enum: [doubleframe, crc4-multiframe, auto-multiframe]
> +          default: doubleframe
> +          description: |
> +            The E1 line interface frame format
> +              - doubleframe: Doubleframe format
> +              - crc4-multiframe: CRC4 multiframe format
> +              - auto-multiframe: CRC4 multiframe format with interworking
> +                                 capabilities (ITU-T G.706 Annex B)
> +
> +    else:
> +      # T1/J1 line
> +      properties:
> +        lantiq,frame-format:
> +          enum: [4frame, 12frame, 24frame, 72frame]
> +          default: 12frame
> +          description: |
> +            The T1/J1 line interface frame format
> +              - 4frame: 4-frame multiframe format (F4)
> +              - 12frame: 12-frame multiframe format (F12, D3/4)
> +              - 24frame: 24-frame multiframe format (ESF)
> +              - 72frame: 72-frame multiframe format (F72, remote switch mode)
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    framer@2000000 {
> +      compatible = "lantiq,pef2256", "simple-mfd";
> +      reg = <0x2000000 0x100>;
> +      interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> +      interrupt-parent = <&intc>;
> +      clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
> +      clock-names = "mclk", "sclkr", "sclkx";
> +      reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
> +      lantiq,data-rate-bps = <4096000>;
> +
> +      pinctrl {
> +        pef2256_rpa_sypr: rpa-pins {
> +          pins = "RPA";
> +          function = "SYPR";
> +        };
> +        pef2256_xpa_sypx: xpa-pins {
> +          pins = "XPA";
> +          function = "SYPX";
> +        };
> +      };
> +
> +      pef2256_codec0: codec0 {

codec-0

> +        compatible = "lantiq,pef2256-codec";
> +        #sound-dai-cells = <0>;
> +        sound-name-prefix = "PEF2256_0";
> +      };
> +
> +      pef2256_codec1: codec1 {

codec-1

> +        compatible = "lantiq,pef2256-codec";
> +        #sound-dai-cells = <0>;
> +        sound-name-prefix = "PEF2256_1";
> +      };
> +    };
> +


Best regards,
Krzysztof




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux