Does this hack only work with the X-Fi Titanium Fatal1ty Pro, or does it include support for all X-Fi based cards from Creative Labs? I have got a Creative X-Fi Extreme Music, that gets infact recognized by my system but modprobing the patched source (modprobe snd-hda-intel, i hope this is the right one) does not work. Here the lspci if this helps: http://pastebin.com/f6e5fafcb -- beomuex Takashi Iwai wrote: > At Sun, 13 Jul 2008 22:51:42 +0100, > Tony "Chainsaw" Vroon wrote: > >> Good evening, >> >> Just wanted to share that this card seems to be HD-Audio compatible (by >> virtue of its UAA compatibility claim); >> http://uk.europe.creative.com/products/product.asp?category=1&subcategory=208&product=17791 >> >> For a while now, I've been trying to write a skeleton patch_creative.c >> to hook up some basic playback functions. As this has failed, I will >> instead post all information I can gather about the card, in the hope >> that such a basic patch_creative.c can be written that I can then slowly >> extend. >> I was unable to set up proper PCM paths (and thus listen to any audio at >> all), but did manage to get the card detected with a simple addition to >> hda_intel.c: >> + /* Creative Labs UAA-compatible */ >> + { PCI_DEVICE(0x1102, 0x000b), .driver_data = >> AZX_DRIVER_CREATIVE }, >> >> A guess at correct mixer controls would be: >> HDA_CODEC_VOLUME("PCM Playback Volume", 0x02, 0x0, HDA_OUTPUT), >> HDA_CODEC_MUTE("PCM Playback Switch", 0x02, 0x0, HDA_OUTPUT), >> HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT), >> HDA_CODEC_MUTE("Surround Playback Switch", 0x03, 0x0, HDA_OUTPUT), >> HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, >> HDA_OUTPUT), >> HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x04, 1, 0x0, HDA_OUTPUT), >> HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT), >> HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x04, 2, 0x0, HDA_OUTPUT), >> HDA_CODEC_VOLUME("Side Playback Volume", 0x05, 0x0, HDA_OUTPUT), >> HDA_CODEC_MUTE("Side Playback Switch", 0x05, 0x0, HDA_OUTPUT), >> >> Please find attached the codec details and the resulting codec graph. >> > > Thanks for reporting. > I've had already a test patch on my unstable tree, but it's pending > just because of lack of testing with the real hardware. > > Could you try the git tree > git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-unstable-2.6.git > ? > > If an external ALSA-driver tarball is preferred, get > alsa-driver-unstable from the below: > http://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/ > > > thanks, > > Takashi > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@xxxxxxxxxxxxxxxx > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
