Re: [PATCH v3 00/28] Introduce QC USB SND audio offloading support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



<snip>

>>
>>>
>>>       USB                          |            ASoC
>>> --------------------------------------------------------------------
>>>                                    |  _________________________
>>>                                    | |sm8250 platform card     |
>>>                                    | |_________________________|
>>>                                    |         |           |
>>>                                    |      ___V____   ____V____
>>>                                    |     |Q6USB   | |Q6AFE    |  #5
>>>                                    |     |"codec" | |"cpu"    |
>>>                                    |     |________| |_________|
>>>                                    |         ^
>>>                                    |         |  #6
>>>                                    |      ___V____
>>>                                    |     |SOC-USB |
>>>    ________   #1  ________         #7    |        |
>>>   |USB SND |<--->|QC offld|<------------>|________|
>>>   |(card.c)|     |        |<----------       ^
>>>   |________|     |________|___ #4  | |       |
>>>       ^               ^       |    | |    ___V__________________
>>>       | #2            |  #2   |    | |   |APR/GLINK             |
>>>    __ V_______________V_____  |    | |   |______________________|
>>>   |USB SND (endpoint.c)     | |    | |              ^
>>>   |_________________________| |    | | #8           |
>>>               ^               |    | |   ___________V___________
>>>               | #3            |    | |->|audio DSP              |
>>>    ___________V_____________  |    |    |_______________________|
>>>   |XHCI HCD                 |<-    |
>>>   |_________________________|      |
>>>
>>>
>>> #1 - USB SND and QC offload:
>>> Initialization:
>>> - Register platform operations, to receive connect/disconnect events
>>>    from USB SND.
>>> - QC offload creates a QMI handle, in order to receive QMI requests
>>>    from the audio DSP.
>>>
>>> Runtime:
>>> - USB SND passes along "struct snd_usb_audio" in order for QC offload
>>>    to reference USB UAC desc parsing/USB SND helper APIs.
>>> - USB device disconnection events will result in clearing of the chip
>>>    entry.
>>>
>>> #2 - USB SND and QC offload endpoints:
>>> Runtime:
>>> - In the non-offloaded path, USB snd will utilize functions exposed by
>>>    USB SND endpoint, to help with fetching USB EP references and queuing
>>>    URBs.
>>> - In the offload path, qc offload will utilize the functions to fetch
>>>    USB EP references, so that it can use that information to query the
>>>    XHCI HCD.
>>> - Likewise, both will clean up endpoints when audio stream is not in
>>> use.
>>>
>>> #3 - XHCI HCD:
>>> Initialization:
>>> - During XHCI probe timing, when the USB HCD is added to the system, it
>>>    will also initialize the secondary event rings.
>>>
>>> Runtime:
>>> - During USB device plug ins/outs, allocates device slot, assigns eps,
>>>    and initializes transfer rings.
>>>
>>> #4 - QC offload and XHCI:
>>> Runtime:
>>> - QC offload needs to reference the transfer ring and secondary event
>>> ring
>>>    addresses by executing XHCI offload management APIs.
>>> - This happens when audio DSP receives a USB QMI stream request.
>>>
>>> #5 - ASoC components:
>>> Initialization:
>>> - The SM8250 platform sound card driver fetches DT node entries defining
>>>    the ASoC links. This chain/link has the components involved for a
>>>    particular Q6AFE path. (not only USB offload)
>>>      - "cpu" - this is the ASoC CPU DAI that handles interaction with
>>> the
>>>                Q6 DSP's audio protocol. (AFE ports)
>>>      - "codec" - the ASoC codec (backend) DAI defined
>>> - Registers ASoC platform sound card based on links defined in the DT
>>> node.
>>>    - Probes DAI components involved, ie Q6USB and Q6AFE
>>>
>>> Runtime:
>>> - Q6AFE has the bulk of the interaction w/ the audio DSP to start an
>>> audio
>>>    session, such as issuing AFE port start commands (part of the
>>> protocol
>>>    used to communicate the audio session info)
>>> - Q6USB will be there to now check for if format requested is
>>> supported by
>>>    the device, and maintain offloading status.
>>>
>>> #6 - Q6USB and SOC-USB:
>>> Initialization:
>>> - Q6USB will query QC offload for USB device connection states. (through
>>>    soc-usb)
>>> - Creates a SOC USB entry, that carries information about resources,
>>>    such as audio DSP memory information and requested XHCI event ring
>>>    index.
>>>
>>> Runtime:
>>> - SOC-USB will receive connect/disconnect events and propagate to Q6USB.
>>>    - Q6USB makes devices available for offloading based on these events.
>>> - Sets Q6AFE port configurations to select the USB SND card# and PCM#.
>>>
>>> #7 - SOC-USB and QC offload:
>>> Initialization:
>>> - Rediscover USB SND devices when the SOC-USB entry is created (if
>>> needed)
>>>      - For situations where the Q6USB DAI hasn't been probed.
>>>
>>> Runtime:
>>> - Propagate connect/disconnect events.
>>
>> Is the SOC-USB module or building blocks intended to be generic or
>> Qualcomm agnostic?
>>
> 
> This should be generic.

ok, but then how would it communicate with APR/GLINK described below [1]
> 
>> It's not clear to me how it would handle "audio DSP memory information
>> and requested XHCI event ring index."
>>
> 
> Each soc-usb entry that is created by the ASoC DPCM backend DAI (q6usb)
> will be able to hold "private data" that, in QC case, is defined as:
> struct q6usb_offload
> 
> This is passed within the snd_soc_usb_add_port() call:
> snd_soc_usb_add_port(component->dev, &data->priv,
> q6usb_alsa_connection_cb);
> 
> So depending on the user, the private data can contain their own struct
> with the information they require.

ok, so "handle private data such as audio DSP memory information
>> and requested XHCI event ring index" is what you meant. That'd fine.

>> In addition, it seems to be the "bridge" or means of communication
>> between qc_audio_offload and q6usb, is this not based on custom events
>> or triggers?
>>
> 
> Ideally, no, it shouldn't be based on custom events.  Intention for the
> connect_cb() that is defined is just to receive USB device discovery
> events from USB SND.  From the qc_audio_offload, we call
> snd_soc_usb_connect() within our platform op that we register to USB SND.
> 
> //Platform connect_cb() - called from USB SND probe (device connected)
> static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
> {
> ...
> snd_soc_usb_connect(usb_get_usb_backend(udev), chip->card->number,
>                 chip->index, chip->pcm_devs);
> 
> In the QC situation, we used this to build a list of active devices
> connected.
> 
>> Along the same lines, this SOC-USB entity interfaces with APR/GLINK
>> which doesn't speak to me so it must be a QCOM interface?>>
> 
> Sorry for not labeling those in the diagram, but yes, those are QC
> specific interfaces.  You can just think of it as a type of IPC transport.

[1] ... something's not clear on how a generic 'soc-usb' component can
directly talk to a vendor-specific IPC.

Is there a missing layer?

>> I am trying to see if this design could be used for other architectures,
>> and the QCOM-specific and generic parts are not obvious.
>>
>>> #8 - audio DSP and QC offload:
>>> Runtime:
>>> - Handle QMI requests coming from audio DSP.  These requests come AFTER
>>>    the Q6AFE port is opened by the Q6AFE DAI(#6)
>>> - Returns memory information about resources allocated by XHCI.
>>> - Enables audio playback when this QMI transaction is completed.
>>>
>>>>>
>>>>>>> When the audio DSP wants to enable a playback stream, the request is
>>>>>>> first
>>>>>>> received by the ASoC platform sound card.  Depending on the selected
>>>>>>> route,
>>>>>>> ASoC will bring up the individual DAIs in the path.  The Q6USB
>>>>>>> backend DAI
>>>>>>> will send an AFE port start command (with enabling the USB playback
>>>>>>> path), and
>>>>>>> the audio DSP will handle the request accordingly.
>>>>>>>
>>>>>>> Part of the AFE USB port start handling will have an exchange of
>>>>>>> control
>>>>>>> messages using the QMI protocol.  The qc_audio_offload driver will
>>>>>>> populate the
>>>>>>> buffer information:
>>>>>>> - Event ring base address
>>>>>>> - EP transfer ring base address
>>>>>>>
>>>>>>> and pass it along to the audio DSP.  All endpoint management will
>>>>>>> now
>>>>>>> be handed
>>>>>>> over to the DSP, and the main processor is not involved in
>>>>>>> transfers.
>>>>>>>
>>>>>>> Overall, implementing this feature will still expose separate sound
>>>>>>> card and PCM
>>>>>>> devices for both the platorm card and USB audio device:
>>>>>>>     0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D
>>>>>>>                          SM8250-MTP-WCD9380-WSA8810-VA-DMIC
>>>>>>>     1 [Audio          ]: USB-Audio - USB Audio
>>>>>>>                          Generic USB Audio at
>>>>>>> usb-xhci-hcd.1.auto-1.4,
>>>>>>> high speed
>>>>>>>
>>>>>>> This is to ensure that userspace ALSA entities can decide which
>>>>>>> route
>>>>>>> to take
>>>>>>> when executing the audio playback.  In the above, if card#1 is
>>>>>>> selected, then
>>>>>>> USB audio data will take the legacy path over the USB PCM drivers,
>>>>>>> etc...
>>>>>>
>>>>>> I already voiced my concerns about exposing two cards, each with
>>>>>> their
>>>>>> own set of volume controls with the same device. It would be much
>>>>>> better
>>>>>> to have an additional offloaded PCM device for card0...
>>>>>>
>>>>>> But if the consensus is to have two cards, it's still not clear
>>>>>> how the
>>>>>> routing would be selected. In the case where there are two USB audio
>>>>>> devices attached, the offloaded path would only support one of the
>>>>>> two.
>>>>>> How would userspace know which of the two is selected?
>>>>>>
>>>>>
>>>>> With patch#24:
>>>>> https://lore.kernel.org/linux-usb/20230308235751.495-25-quic_wcheng@xxxxxxxxxxx/T/#u
>>>>>
>>>>> Now, userspace can at least choose which device it wants to offload.
>>>>> Part of doing that would mean userspace knows what USB SND card
>>>>> devices
>>>>> are available, so it is aware of which devices are shared (between the
>>>>> offload and USB SND path)
>>>>>
>>>>>> And how would userspace know the difference anyways between two
>>>>>> physical
>>>>>> devices attached to the platform with no offload, and one physical
>>>>>> device with one additional offload path? The names you selected
>>>>>> can't be
>>>>>> used to identify that card1 is the optimized version of card0.
>>>>>>
>>>>>
>>>>> Is userspace currently able to differentiate between cards that are
>>>>> created by USB SND versus ASoC?  How complex can the userspace card
>>>>> discovery be?  Can it query kcontrols at this point in time?  If so,
>>>>> maybe we can change the names of the newly added ones to reflect
>>>>> that it
>>>>> is an offload device?
>>>>>
>>>>> SND kcontrol names are currently:
>>>>> Q6USB offload status
>>>>> Q6USB offload SND device select
>>>>
>>>> I must admit I've never seen kcontrols being used to identify what the
>>>> card is, and in this case it's a pretend-card that's just an improved
>>>> version of another. It might be easier to use something else, such as
>>>> the component strings.
>>>
>>> Its not exactly a pretend card, right?  This is part of the overall
>>> platform sound card we have in the system.  At the moment, I'm only
>>> testing by adding the USB audio routing, but there can be several ASoC
>>> links defined in the overall platform card.
>>
>> Sorry, I misunderstood the proposal. I thought there would be one card
>> for "generic USB Audio", and another one for "DSP-offloaded USB Audio".
>> I assumed, probably mistakenly, that all local audio endpoints
>> (speaker,mics) would be exposed as a separate card.
>>
> 
> Ah got it.  No, that isn't the case here.
> 
>> It looks like it's more "generic USB Audio" and "DSP Audio", with the
>> USB offload being exposed as a PCM device of the latter.
>>
>> Did I get this right? In this case, presumably there can be some sort of
> 
> Yep that's correct!

ok, that's good.

My initial thought was to add a 'DSP offload' PCM to the USB card, you
added a "USB offload" PCM to the DSP card. Nice logical swap!

Your proposal might be easier in practice since there's typically a
vendor-specific configuration file (UCM or custom) file for the DSP,
where USB information can be added.

It's more problematic to change a generic USB card as we know it today
and bolt vendor-specific DSP information on top.

The only open I have with your option is that there are still two
control paths to e.g. set the volume. It would be so much easier for
userspace if there was a single volume control no matter what path is
used for data, or make sure the kcontrols are 'mirrored' somehow. If we
found a way to address this issue that would be ideal.

>> UCM file for the "DSP Audio card" that contains the configuration or
>> knows which kcontrols to look for. But my point about detection hold.
>> You could perfectly well have a 'Jack control' that tells userspace when
>> a device is connected. That way there's no guess work, it's similar to
>> HDMI for Intel: the device is exposed but only valid when the jack
>> control is set.
>>
> 
> Hmm, ok.  Let me see if I can switch up some things.  Maybe replace the
> current snd_soc_dapm_enable_pin() calls in the q6usb connection_cb and
> replace that with a snd jack report. (the snd jack implementation
> already takes care of updating the pin if needed)

The jack is useful to let userspace know if a PCM device, i.e. a
Front-End, can be used. But if you expose a PCM device, nothing prevents
an application from trying to open and use it, we recently had such an
issue due to a change in PipeWire that tried to open a non-functional
HDMI device. So you do need something to bail if the PCM device is
mistakenly used.

DAPM pin management seems different, it will turn-on/off parts of the
graph connected to an endpoint. Userpace will typically not know
anything about pin management, it's an in-kernel concept.

Not sure if you have to choose, those are two different layers, no?



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux