Sure ...going over to private email. Florian Faber wrote: > Dee, > >>>> Any ideas? >>> There is no difference on the MADI bus wether you use Windows, OS X >>> or Linux. This seems to be a specific problem with the Euphonix. >> I have no reason to believe the MADI bus is different. However, I >> suspect the stream are different. > > The MADI cards work autonomous, they are only controlled by a few > parameters. If the parameters are the same, the behaviour is the same. > Thus the settings must differ, and we have to find out where. > >> I have two Euphonix boxes and they both behave perfectly under >> windows - but not under linux. The main problem under linux is that >> they lose sync - at the slightest electromagnetic interference (such >> as turning off/on the speakers - on the analogue side - even from a >> distance of 3 metres). > > I don't believe electromagnetic interference to be a reasonable cause > for this. What exactly is your setup - 1x 703 and 1x 713? And both lose > sync? > > I just had a glance over the Euphonix' user manual and had to learn that > they cannot loop through MADI and you have to use the wordclock. So, > please, be a bit more specific about the setup - and maybe via private > mail, because that's of no relevance to alsa development.. > > > Flo _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
