With the switching to dev_err_probe(), during the conversion of GPIO calls, the return code is passed is a paratemer to it. At the same time a copy'n'paste mistake was made, so the wrong variable has been taken for the error reporting. Fix this. Fixes: 3ee0d39c50dc ("ASoC: soc-ac97: Convert to agnostic GPIO API") Reported-by: kernel test robot <lkp@xxxxxxxxx> Reported-by: Dan Carpenter <error27@xxxxxxxxx> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- sound/soc/soc-ac97.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-ac97.c b/sound/soc/soc-ac97.c index 40051f513c6a..4e4fe29ade50 100644 --- a/sound/soc/soc-ac97.c +++ b/sound/soc/soc-ac97.c @@ -336,12 +336,12 @@ static int snd_soc_ac97_parse_pinctl(struct device *dev, cfg->sdata_gpio = devm_gpiod_get_index(dev, "ac97", 1, GPIOD_ASIS); if (IS_ERR(cfg->sdata_gpio)) - return dev_err_probe(dev, PTR_ERR(cfg->sync_gpio), "Can't find ac97-sdata gpio\n"); + return dev_err_probe(dev, PTR_ERR(cfg->sdata_gpio), "Can't find ac97-sdata gpio\n"); gpiod_set_consumer_name(cfg->sdata_gpio, "AC97 link sdata"); cfg->reset_gpio = devm_gpiod_get_index(dev, "ac97", 2, GPIOD_ASIS); if (IS_ERR(cfg->reset_gpio)) - return dev_err_probe(dev, PTR_ERR(cfg->sync_gpio), "Can't find ac97-reset gpio\n"); + return dev_err_probe(dev, PTR_ERR(cfg->reset_gpio), "Can't find ac97-reset gpio\n"); gpiod_set_consumer_name(cfg->reset_gpio, "AC97 link reset"); return 0; -- 2.39.1