On 7/1/08, Grant Likely <grant.likely@xxxxxxxxxxxx> wrote: > From: Grant Likely <grant.likely@xxxxxxxxxxxx> > > This is an I2S bus driver for the MPC5200 PSC device. It is probably > will not be merged as-is because it uses v1 of the ASoC API, but I want > to get it out there for comments. > --- The driver is assuming a capture stream exists. My codec is output only. I'm using external clocking, but the driver should support using the mpc5200 for clocking. That's a little complicated since you have to compute the divisors. For example the Phytec pcm030 board has a 33.3333Mhz xtal and runs at 400Mhz. In order to reduce options, can the psc-i2s driver always try to use mpc5200 clocking, then let the codec or fabric driver override it? -- Jon Smirl jonsmirl@xxxxxxxxx _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
